Specifications include, but are not limited to: Description of Demolition or Associated Work Demolition - properly dispose of all debris off- property unless otherwise noted. 1) The contractor shall remove existing reception counter and folding leaf. 2) The contractor shall remove existing VCT flooring. 3) The contractor shall remove existing storage room door and enclose opening with stud and drywall. New Work 1) The contractor shall provide and install new plank style LVT flooring using Happy Feet brand adhesive throughout multi-purpose room, vestibule, and reception area. 2) The contractor shall provide and install new 9/16-inch x 3 ¼-inch x 4-inch traditional wood base molding, to be stained to match new window trim, throughout multipurpose room, vestibule, and reception areas. 3) The contractor shall provide and install 10 new pendant style lighting (8 in multipurpose room and two behind reception counter. 4) The contractor shall provide and install two new wall mount emergency exit lights with arrow adjacent to exit doors. 5) The contractor shall provide and install new 7-foot-long x 40-inch-high wing wall using 2x4 studs and ½-inch drywall. Cap with new 1-inch x 6-inch-stained wood to match new window trim. 6) The contractor shall provide and install new slatwall in gift shop area installed from approximately 24-inches above floor to the ceiling. Trim exposed edges with black trim pieces. The area to be covered is approximately 6-feet high x 32-feet long. 7) The contractor shall provide and install new 4-foot by 8-foot storage extension and install new metal storage closet door to area behind reception desk. Contractor shall make adjustments to drop-in ceiling track and panels to accommodate adjusted wall location. 8) The contractor shall provide and install new solid wood, custom built 10-foot straight reception desk with two two-level high areas and one ADA counter. The desk should have 42-inch-wide high counter on each side and 36-inch-wide ADA counter in center. The high counters shall be 42-inch x 12-inch x 42-inch located 48-inch above floor. The desk level for the high counter areas shall be 39-inch high. The ADA counter shall be 36-inch height. Each high-top area should have two 10-inch wide, three drawer cabinets on each side of below counter space and open in the middle for leg room. The low counter area should have locking double door cabinets below. Undercounter keyboard tray. Stained wood front. 9) The contractor shall provide and install new stained wood support beams in an Aframe style design with ridge beam. Cross member to be located ¼ down beam. Five total beams with one on each end and three evenly spaced out across room. 10) The contractor shall replace all light switches with new LED compatible dimmer switches and new covers.
