Specifications include, but are not limited to: Placement of reflectorized high-durable acrylic traffic painted marking installed at 22 to 25 mils wet film thickness, 4 IN Stripe, white and Yellow (M-TPCWBACRHB ROHM & HAAS HD-21 type II emulsion or DOW DT 400 NA emulsion). To include shadow vehicles with warning lights and arrow boards. Mobilization required to complete work and all requisite traffic control. Labor and material. Milled 4-6” wide groove, 75-100 mil depth; Obliteration of existing long line pavement markings 4-6 IN stripe; Obliteration of existing pavement markings by the square foot; Layout of passing/no-passing zones, unmarked roadways and auxiliary lanes to include left and right lanes, and acceleration and deceleration lanes. This item will be measured by the linear foot of center line stripe or length of auxiliary lane(s). Mobilization included. Sweeping. This item to be measured by the linear foot of the stripe to be swept. Sweeping shall be for the lane line where pavement markings are to be directly applied, not the entire roadway surface. For roadways with a centerline stripe, the centerline will be considered one lane line. Note, cases where debris requires more than one pass shall be considered incidental to the measurement.
