Specifications include, but are not limited to: The following is a synopsis of visible repair work required within the structures two existing burn rooms, as well as the addition of a third burn room. The images are meant to illustrate a variety of areas that need repair, along with the creation of a third burn room in the structure’s single-story annex section. First Floor Burn Room – Renovations: Room Dimensions: 11’ L x 11’ W x 9’ H Remove and Replace existing burn tiles with upgraded tiles. Replace both entry door frames. Replace front window frame. “A” side door frame and wall replacement. Install steel corner protection around burn room doors. 4”x4” x 6’ Upgrade temperature monitoring system. Remove and replacement of (3) three floor joist outside of the burn room, for the second floor. Second Floor Burn Room – Renovations: Room Dimensions: 11’ L x 11’ W x 9’ H Remove and Replace existing burn tiles with upgraded tiles. Replace “A” side window frame. Replace “C” side window frame. “A” side door frame and wall replacement. “C” side door frame and wall replacement. Install steel corner protection around burn room doors. 4”x4” x 6’ Upgrade temperature monitoring system. New Burn Room – Single Story Annex Section: Room Dimensions: 22’ L x 14’ W x 9’ H Installation of new burn tiles on walls, and ceiling. Installation of temperature monitoring devices. Change out (1) one interior door to a spring hinge style door similar to the existing burn room doors. Modifications to protect the exterior “B” side entry door into the burn room.
