Specifications include, but are not limited to: Overall Dimensions: 34 inches (depth) x 96 inches (width) x 87 inches (height) Depth (inches): _________________ Width (inches): _________________ Height (inches): _______________ Comply Yes/No: ____________________ Lifting Capacity: The minimums are as follows: • 9,000 at a reach of 14 feet • 6,300 at a reach of 20 feet 6 inches • 4,500 at a reach of 27 feet • 3,500 at a reach of 33 feet 6 inches • 2,800 at a reach of 40 feet • 2,400 at a reach of 47 feet Comply Yes/No: ____________________ Lifting Moment: 160,000-pound minimum Comply Yes/No: ____________________ Boom: To have a 5-section hydraulic boom that can reach a minimum of 48 feet. Shall be one piece of high-strength steel six-sided with one welded seam. One individual cylinder for each section shall be provided. Shall be internally ported to supply oil to the next extension. Pipes shall connect one extension cylinder to the next. The extension boom section shall be sequenced where required. One individual cylinder for each section shall be provided. Shall be internally ported to supply oil to the next extension. Pipes shall connect one extension cylinder to the next. The extension boom section shall be sequenced where required. The extension system shall utilize the return oil for increased boom extension speeds. Extension cylinders shall be mounted at each end of the cylinder barrel to minimize rod deflection. The extension system shall have self-lubricating guide pads that do not require greasing. Extension cylinder guides shall have self-lubricating guide blocks that do not require greasing. The main and outer boom shall be equipped with a linkage system. The outer boom shall lock in the transport position. The main boom shall set in boom rest in the transport position. The crane shall have a 17,640-pound roller-bearing load hook. Boom and outrigger shall be equipped with a transport position check switch, wired to the acoustical alarm in the cab, to sound an in-cab alarm if PTO is disengaged and the boom is not in proper stow position. Comply Yes/No: ____________________ Rotation: Shall have 400° degrees of rotation. The net rotation torque shall be no less than 16,750 pounds. Rotation shall be via rack and pinion system. Crane shall have slew angle monitoring that allows capacity limitations based on the position of the rotation. The crane shall be equipped with soft-stop slewing. Rotation (degrees): ____________________ Comply Yes/No: ____________________
