Specifications include, but are not limited to: Remove and dispose of all roofing and defective sheathing. Synthetic felt and plastic cap fasteners. install ice and water shields in all valleys. Install preformed aluminum, drip edge and vent pipe boots. Install metal flashing around chimneys and metal wall flashing to prevent water intrusion, seal and caulk. Install a 220 lb fiberglass asphalt 3 tab shingle with a 25 year warranty. Replace all flashing pipe vents and install turbines. Labor will require 5 year warranty on roof. Install a 24" plywood vanity; including top with backsplash, wash bowl and single lever brass bodied chrome faucet with a maximum 1.5 GPM flow rate. Include PVC drain attached to code legal plumbing vent, use type L copper or PEX supply piping with brass bodied stops on all supply lines. Seal all penetration through the floor, walls and cabinet for plumbing connections using expanding foam orcaulk and cover with chrome eschucion plates.. All exposed edges must be sealed with a low-VOC sealant. Install a mounted, UL approved, 2 bulb light fixture controlled by ab ivory switch with ivory cover located ate the strike side of the door. Fish wire and repair all tear out.
