Specifications include, but are not limited to: Blower must be made in the United States by an ISO 9000 certified manufacturer. Yes ____ No ____ The snow blower must have a rated capacity of up to 2000 tons per hour, dependent on snow density. Yes ____ No ____ Shall be capable of casting distances up to 120 ft., dependent on snow density. Yes ____ No ____ Unit shall be completely self-contained, two-stage design. Yes ____ No ____ Approximate weight of unit, less quick hitch, shall be 7,600 lbs. Yes ____ No ____ The first, auger stage, shall feature a minimum three (3) 12-inch diameter full flight serrated augers. Yes ____ No ____ All augers shall be constructed or 7/32-inch wall tubing, ¼-inch flights and 3.437 O. D. Tubing Yes ____ No ____ All augers shall be supported by self-aligning ball bearings Yes ____ No ____ Auger drive shall be protected by hydraulic relief. Yes ____ No ____ The augers shall be driven by a chain, in an oil bath. There shall be an idler sprocket that automatically insures proper tension. Yes ____ No ____ The second, impeller stage, shall have a 38-inch diameter, six (5) replaceable blades made of T-1 steel. Yes ____ No ____ The impeller shall be protected by a hydraulic relief. Yes ____ No ____ The impeller shall be housed in a ¼-inch T-1 hot rolled housing. Yes ____ No ____ The housing shall be 10-inches deep.
