Specifications include, but are not limited to: The Town of Roxbury (the “town”) is inviting qualified contractors to submit proposals for the removal of underground fuel oil tanks and installation of new above ground fuel oil tanks at the Public Works, 31 North Street, Roxbury, CT; All labor, materials, services, and equipment necessary for completion of the work for the Project as described in Proposal Documents and the Instructions which shall include, without limitation, the removal of two (2) underground fuel oil tanks and installation of a new above ground fuel oil tank, and all other components of the work; The selected Contractor will need to submit and cover fees for any required permits to complete the work. The selected Contractor will work with the Selectman’s Office, Public Works Employees, CTDEEP and the Fire Marshalls of the Town of Roxbury, Connecticut Building Departments. Contractor shall be responsible to comply with all applicable laws and regulations and coordination with all officials. The project includes installation of 1 AST. One 6,000 gallon split AST, 4,000 gallon diesel and 2,000 gallon gas. Contractor to supply appropriately sized new tanks that are UL-142 rated horizontal cylindrical or rectangular double wall steel fuel oil tank, Highland Tank or Container Solutions Tank or equivalent with a minimum of (1) year warranty on tank and labor. The tank shall include the following minimum items, ladder and platform for fill access, mounting cradle if needed, a built in spill containment with a 6” fill, an 18” manhole, an appropriately sized primary vent, a 2” mechanical gauge level opening, a 4” electronic gauge level opening, 2” internal interstitial monitor pipe, grounding lug, 2” suction pump opening and lifting lugs or locations appropriately sized and placed by the manufacturer. All openings shall be capped until needed. In addition, provide labor and materials to make the necessary connections from the newly installed tank to the interior boiler feed and/or return lines. The materials used shall be copper type ‘L’, with braised fittings from the tank to the feed and or return line locations. Remove any overhead existing fuel supply or return lines and cap any underfloor fuel supply and/or return lines in the spaces at floor level. All lines shall be pressure tested to allow for no leaks. Existing Tank to be relocated and modified for heating fuel and connected.
