Specifications include, but are not limited to: Following a period of field testing and product review, the following two (2) structural firefighting glove models have been found by the Indianapolis Fire Department to be acceptable for purchase and standardization. IFD ideally intends to issue an award for each of the two models, and vendors may bid either or both. LION® Primus™ Manufacturer: Lion (Dayton, OH) Pricing: Single price for all available manufacturer sizes (per wrist style), including cadet sizes. Estimated Annual Quantity: 500 Pairs • Wristlet Style Lion-Primus Specifications Specifications shall include the following: 1. TPP RATING (cal/cm2) >60 2. Enhanced wristlet cuff 3. Available sizes – regular sizes XXS to 4XL and cadet sizes S to XXL 4. 3-D design with fingertip control, stretch and grip. 5. Heat-resistant, flexible, and durable leather outer shell for protection against thermal assaults, cuts, and sharp objects. 6. CROSSTECH® Insert w/Film Technology barrier insert and Kovenex® thermal liner. 7. Sewn-in liner. 8. Added Lite-N-Dri™ insulation with knuckle pad to increase thermal and impact protection in high-heat and high abrasion areas on the back of thumb and back of hand. 9. Continuous fourchette pattern with contour thumb. Shell is black-colored cowhide split with gray-colored grain sheepskin fourchettes and padded knuckle inlay. 10. Shall meet NFPA 1971-2013 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting and Safety Equipment Institute certification testing requirements. Fire Dex Pro Manufacturer: Fire Dex (Medina, OH) Pricing: Single price for all available manufacturer sizes (per wrist style), including cadet sizes. Estimate Annual Quantity: 500 Pairs • Wristlet Style Fire Dex Pro Specifications Specifications shall include the following: 1. 60+ TPP and 2 layers of thermal that extend all the way down the fingers. Vapor Flex™ moisture barrier included. 2. TEX-80 KEVLAR® THREAD-Leathers are sewn with a Tex-80 Kevlar® thread for tensile strength and resistance to abrasion. 3. TEX-80 NOMEX® THREAD- Liner to be sewn with Tex-80 Nomex® thread. 4. NOMEX® KNIT WRIST (as applicable)
