Specifications include, but are not limited to: Ballistic Protection Opaque Armor (Occupant area) U.S. Government Ballistic Certification rated at, or greater than, an NIJ Level IV Armor Standard as published under the NIJ 0108.01 Standard Chart. .50 caliber M33, Ball Defeat Capability to include all vertical panels including front fenders around engine compartment. Submitted armor coupon must be proven to stop two (2) successive .30-06 AP rounds of ammunition fired from a bench rested rifle at no less than 5 yards. Bidder must supply two (2) 12” x 12” armor coupons to verify armor capability. Defeats 10 rounds of .50 BMG M33 ball ammunition within the 12” square armor coupon. Engine Surround Armored hood with traditional opening hood and safety rod. Blast Protection Blast resistant floor. Transparent Armor Vehicle body armor should extend to protect the edges of the passenger windows, the driver window, and the door edges. The above delineated areas should be covered by matching vehicle body armor as outlined above. Crew area minimum of four (4) ballistic windows on side walls (must provide drawings validating rear window dimensions). Fuel Tank NIJ III or greater Performance Base Chassis 4x4 Chassis Engine Options 6.7L V8 turbo diesel Or Greater Transmission 10-speed or greater HD automatic with select shift Transfer Case 4 Wheel Drive with Auto-Locking Hubs, shift on fly capability Brakes Four-wheel disc anti-lock brakes (ABS) Suspension Custom tuned shocks with external reservoir. Upgraded HD steering damper Tires Run flats commensurate with off-road package Side Slope Minimum of 36 degree side slope (must provide documentation from Armored Vehicle Aberdeen Performance or U.S. equivalent) Paved Surface Stopping Requirements 20 mph stopping distance maximum 27.5 feet 40 mph stopping distance maximum 97.5 feet 60 mph stopping distance maximum 230.5 feet Secondary Road Requirements 20 mph stopping distance maximum 27.5 feet 30 mph stopping distance maximum 51.5 feet
