Specifications include, but are not limited to: Sandy City is soliciting bids to supply 3/8-inch Bituminous Concrete Paving Material from July 1, 2023 to June 30, 2024. The pavement mix design must meet the current asphalt specifications set in section 02513 in the manual 'Sandy City Standard Specifications and Details for Municipal Construction' (latest edition), available at the office of the City Engineer. With the exception, this pavement mix will not require the use of Hydrated Lime. Sandy City will provide its own delivery transportation for the asphalt material. This product is to be available for Sandy City to be loaded at your facility at any time during the asphalt producing months or when the batch plant is open on an as needed basis. An estimated 7,000 tons will be needed. This project may be awarded to more than one vendor because of travel time to batch plant, plant delays, and availability of the required material when needed by City crews. Submit a Marshall Mix design (when requested) using ASTM D 1559 procedures and comply with Sandy City Specifications. Use an aggregate that the combined dry mineral aggregate is uniformly graded and of such size, that it meets the gradations specified below when tested in accordance with AASHTO T-30. Gradation for the Bituminous Paving Material: 3/8 INCH - PERFORMANCE GRADE ASPHALT Sieve Size Percent Passing by Weight 3/8 inch 90-100 No. 4 <90 No. 8 32-67 No. 200 2-10