Specifications include, but are not limited to: It is the intention of these specifications to provide to prospective bidders the requirements for the Furnishing, Delivery, and Installation of Asphalt cart paths for Kenton County Golf Courses. NEW PATH, hole 16 pioneer golf course (approximately 5000 square feet) -Excavate and remove topsoil to proper depth to facilitate new cart path. stockpile topsoil onsite for future use -Compact sub base -Install 8” of DGA limestone and compact -Install 2.5” of surface asphalt and compact -Grade stored topsoil to bank edges and blend with existing grade. Pioneer golf course holes 10,11,12,13,16,17,18 8” full depth repair, (500 sq ft in various locations) -Excavate bad areas to a depth of 6” and compact sub base -Clean areas manually and with power blowers -Install 6” of recycled crushed concrete or stone base and compact; Pioneer golf course holes 10,11,12,13,16,17,18 resurface cart paths (continuous) Approximately 60,000 square feet (9000 linear feet) -Peel existing asphalt where necessary to allow for flush asphalt finish and proper water drainage -Clean all areas manually and with power blowers -Torch excess grass from existing paths as needed -Apply a tack coat of adhesive -Pave entire section with 2” of surface 404 asphalt and compact -Some areas will require thicker layer of asphalt to eliminate slope and make paths more level.
