Specifications include, but are not limited to: Contractor shall provide all materials including but not limited to joint compound, paper tape, metal corners, caulk, silicone, paint, primer, sealer, brushes, rollers, trowels, drop cloths, ladders (step and extension), spray equipment, labor, supervision and transportation. Painting services will be requested on a task order basis and shall include the preparation and painting of interior of occupied PHA units. Preparation will include moving furniture and other items in the way of targeted areas. The return of furniture and other items when upon painting being completed. Working in occupied units with minimal disturbance. Patching, repairing and finishing holes in targeted areas of less than 1 square foot of area. Painting walls, ceiling and trim work with the specified PHA selected color. Interior Drywall Finishing Services Apply proper repairs and sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, and press paper tape over joints to seal. Enough coats to blend joints with wall surfaces and be smooth. Sand or patch nicks or cracks on walls Countersink nails or screws below surfaces of walls before applying sealing compounds. Apply texturizing compounds or primers to walls or ceilings before final finishing. Interior Paint Services Prime where needed (due to dark colors, water damage, smoke damage), all walls, doors, wood trim and repair damage, which includes scraping, spackling and sanding walls/ceilings, with: 1 Coat Pro Mar 200 Zero VOC Primer (6502-59195) or PHA Approved Equal Paint finish coat on all walls and ceilings with: 1 Coat Pro Mar 200 Zero VOC Eggshell (6501-75441) Color: Bartram Cream or PHA Approved Equal Paint finish coat on all wood trim and doors with: 1 Coat Pro Mar 200 Zero VOC Semi-Gloss (6501-87214) Color: dover white or PHA Approved Equal The Contractor is to perform all work in accordance with the above mentioned manufacturers specifications. The contractor shall provide the paint in support of painting services. The contractor is to supply all drop cloths, brushes, rollers, furniture protection and all equipment necessary to complete work in accordance with the manufacturer’s specifications. The floors within each unit are to be protected from drips and over spray. The contractor is responsible for all area preparation, surface preparation, and cleanup and returning of furniture to original locations. All work is to be inspected and approved by the designated PHA Representative upon completion for quality approval and verification of quantity of work performed. The contractor is required to provide and adhere to a schedule that is approved by the designated PHA Representative.
