Specifications include, but are not limited to: Contemplated work consists of furnishing all labor, materials and equipment necessary for the construction of the Fleet Break Room Construction Project. The metal building was originally constructed in 2001 to be used as a natural gas fired electrical generation plant. The plant and all ancillary equipment required to run the operation have been removed and in 2007 it was converted to SUB's Fleet Shop with a bay for metal fabrication and five bays for auto repair services. The shop is complete with restroom and office space with a mezzanine area above for storage. Change of occupancy at existing mezzanine. Current occupancy is storage. Proposed occupancy is business & use is employee training & break room. Structural alterations include extending pony walls to full-height, adding ceiling framing, the addition of exterior accessible stairway, adding two interior windows, & the addition of two exterior doors. Mezzanine is proposed to be enclosed per OSSC 505.2.3 Exception 1 & 3. Two work stages are required, with a possible time interval of 30 days between phases for completion of mechanical, electrical, low voltage work. Work shall include but is not limited to: Reference Branch Engineering Inc. Drawings & Specifications Project NO. FAC.17.23 1. Fabrication and installation of steel stairway, guards and handrails. 2. Installation of stairway landing footing. 3. Cut and/or remove existing framing and siding at proposed door locations. 4. Cut and remove foundation wall for proposed door. 5. Frame walls, ceiling, doors and window opens. 6. Install 7/16" fire-retardant treated plywood cap sheathing on ceiling. 7. Install 7/16" fire-retardant treated plywood on walls where required. 8. Installation of batt insulation in walls (R-13), ceiling (R-30), floors (R-19). 9. Installation of ½" gypsum wall board (G.W.B.) where required. 10. Installation of two (2) 4'-0" x 4'-0" operable vinyl interior windows as per Window Schedule, Sheet A101. Include window box out and casing (3 ½" x ¾" MDF, Style: Craftsman). 11. Installation of two (2) 3'-0" x 7'-0" exterior metal doors, jambs, thresholds and hardware as per Door Schedule, Sheet A101. Including window door casing (3 ½" x ¾" MDF, Style: Craftsman). 12. Existing window: Provide wall opening, jamb extensions, wall finishes. 13. Bid to include drywall texturing and all interior and exterior painting.
