Specifications include, but are not limited to: HULL REQUIREMENTS Aluminum 1.11 Welded, corrosion resistant, and suitable for commercial use Non-Skid Flooring 1.12 Alumnium, no vinyl covered wood flooring Bottom Thickness and Protection 1.13 Suitable for shallow water use, heavy duty construction SEATING Operator 2.11 Ergonomically designed for operator wearing full rescue gear Additional 2.12 Must be able to carry 3 adult passengers safely PROPULSION Engine 3.11 Major manufacturer, must be USCG/ABYC compliant installation Pump 3.12 Major manufacturer, performance matched impeller, stomp grate installed Fuel Tank 3.13 USCG/EPA approved & compliant, permanently mounted under floor ELECTRICAL Electrical System: 12 volt Negative Ground 4.11 Marine battery maintenance charger system, plug in port easily accessible Dual Batteries: secured in transom 4.12 AGM batteries, selector switch in easily accessible location All Electrical Shall Comply with ABYC Standards 4.13 Fuses and circuit resets easily accessible LIGHTING USCG Approved LED Navigation Lights 5.11 Emergency Responder LED Lights 5.12 Installed with dash mounted switches Siren Box and Public Address w/ Speaker 5.13 Installed with dash mounted switches & hand mic BOAT TRAILER Commercial Duty Trailer - Welded 6.11 Aluminum or galvanized steel OTHER CRITERIA Swim deck with boarding ladder 7.11 Non-skid surface and grab handles Two 2000 GPH Bilge Pumps 7.12 1 Auto, 1 Manual - wired separately - "Auto" always powered Center Console 7.13 Grab handles on each side and radio compartment
