Specifications include, but are not limited to: A. Contractor shall provide all equipment and materials necessary to furnish and install two (2) GP630AADJGH Gooseneck Hydraulically Hinged Adjustable College/High School Ground Sleeve Football Goal Posts and Accessories. B. Components: 1. Contractor shall provide and install a two piece Hydraulically Hinged Gooseneck Support consisting of the following components: a. Upper and Lower Gooseneck Fabricated of 6” Schedule 40 Aluminum Pipe (6.625” O.D.) with the Upper Gooseneck Rolled to a 3’ Radius and 6’ Offset. b. ¾” Aluminum Mounting Plates with ¾” Aluminum Gussets c. ¾” A572 Steel Hinge Plates with a Black Powder Coated Finish d. ½” Dia. Grade 8 Zinc Yellow-Chromate Plated Steel Pivot Pin e. Hydraulic Cylinder, 2.50” Bore x 1.25” Rod, 12” Stroke, 3000 PSI f. ½” Dia. x 3.50” Long 17-4 Stainless Steel Locking Pull Pin, Includes Padlock 2. Contractor shall provide and install a removable Hydraulic Compartment: Fabricated of 0.125” Aluminum Sheet with Removable 0.125” Aluminum Cover with Handle that consists of the following components: a. 4.25 Cup Capacity Hydraulic Fluid Tank Fabricated of 0.125” b. Aluminum Sheet with Plastic Vented Cap c. 0.097 in3, 4000 PSI Hydraulic Gear Pump for Raising Goal d. 3-Way Directional Control Valve with Adjustable Relief Valve for Lowering Goal, 3000 PSI Max e. Adjustable Flow Control Valve, 5000 PSI Max f. 3/8” I.D. Hydraulic Hose with Quick Disconnect Coupling, 4000 PSI Max g. Assorted Steel and Stainless-Steel Fittings, Couplers, and Mounting Hardware h. 4.00 Cups of AW-46 Hydraulic Fluid 3. Contractor shall provide and install a crossbar: Fabricated of 6” Schedule 40 Aluminum Pipe (6.625” O.D.) a. Length: Adjustable from 18’-6” to 23’-4” (College/High School) b. Includes Patented AdjustRight® feature allowing for easy installation through the adjustment of an internal locking rotating sleeve at both the gooseneck/crossbar and upright/crossbar connections. This adjustment can easily be repeated throughout the life of the football goal post ensuring proper alignment of all components for years of competition and all with the added benefit of no exposed hardware on the face of the goal. c. Thermal arc sprayed internal textured mating surfaces and anti-vibration enhancements such as serrated washers and nyloc coated bolt ends ensure the AdjustRight® Football Goal Posts remain in position. d. Contractor shall provide and install Uprights: Fabricated of Extruded 6061-T6 Aluminum Tube (4”O.D.) with Rigid Wire Loop Welded to Upper End Length: 30’
