Specifications include, but are not limited to: It is envisioned that this new center will be an approximately 4,000 sq.ft. facility with 6 to 8 issuance stations.The facility will have adequate space for queuing customers, and dedicated areas for 4 customer kiosk and20 testing computers. The testing area will be designed in a way that will prevent noise from interfering with customers. It is also envisioned that there will be adequate space near the customer exit door for a self-service kiosk. The administrative portion of the building should be able to accommodate 2-3 offices, asupply closet, and other ancillary support space as needed. The new building must adhere to a minimum10 feet setback from adjacent side property lines. In addition to the building, the site must be designed ina manner as to provide space for two basic skills test courses and one motorcycle test course that must beseparated from the main parking lot with limited access. These test areas should be easily accessible froma covered area connected to the building for conducting car inspection prior to their entering the testing areas. The existing testing pad may be expanded however soil conditions will need to be investigated for feasibility. The existing facility will maintain operations during construction and the project will include demolition of the existing building following the opening of the new facility. Construction should not impact daily operations. Project will also include new parking striping and some paving/repaving.
