Specifications include, but are not limited to: ITEM 1 - SEMI TRUCK SCOPE OF WORK - The work consists of furnishing and delivering one (1) only, NEW Semi Truck. The Contractor shall present the vehicles / equipment complete, fully operational, and ready to use. SEMI TRUCK - The Specifications contained herein establish minimum standards (unless stated differently). Vehicle / equipment offered shall include any other standard features not listed but detailed in manufacturer’s brochures and deemed necessary for proper and safe operation of vehicle/equipment. Vehicle must have current safety inspections at time of delivery. Model/Year Kenworth T880 or similar; latest production. Engine/powertrain Paccar MX13 510HP, 1850 lb-ft of Torque or Cummins X15 510HP, 2,000 lb-ft or Torque TruckTech+ Remote Diagnostics Exhaust/Aftertreatment Standard RH Under DPF/SCR with vertical side cab tailpipe Small Round DEF Tank – 11 usable gallons Transmission 18 Speed Manual Electrical Standard options Multiplex electrical system with centralized power distribution incorporating plug-in style relays & circuit protection for serviceability 12 Volt lighting system with circuit protection Circuits numbered and color coded Key switch start & shutdown Starting and Charging Standard options 160 Amp Alternator PACCAR 12 volt starter Three PACCAR Dual purpose batteries Frame Standard options 10 5/8” Steel – 120,000 psi – Heat treated Axle and Suspension Standard options Front axles – Meritor, 12,500 lb. Front springs – taperleaf w/shocks, 12,000 lb Rear axle – PACCAR, 40,000 lbs. Tandem Rear suspension – Reyco 102, 38,000 lbs. tandem Rear Axle ratio 4.56 gear ratio Brakes Standard options Front – Air Disc Rear – Air Drum ABS, ATC, ESP – Bendix Wheels/Tires Standard options Wheels – steel 22.5” Bridgestone 295/75R22.5 Fuel tanks Standard options 24.5” Round aluminum 100 gallon capacity Batter boxes Standard options Steel battery box with aluminum step cover Bumpers Standard option Aluminum channel bumper Cab/Hood/Interior Standard options Cab – stamped aluminum Hood – 5 piece Metton Sloped vocational hood with bolt on fenders, MX Hood - 116.7” BBC Complex reflector halogen headlamps Aerodynamic breakaway heated mirrors Adjustable telescoping tilt steering column Standard vintage vinyl headliner and cab back panel High back driver seat High back toolbox plus rider seat Power door locks Passenger=side electric window Driver assistance technology Standard options Stability control Lane departure warning Special equipment and options Backup alarm Two line pressure and return wet-kit Auxillary air and electrical switches, and two way tarp switch Color White
