Specifications include, but are not limited to: 1.01 Vehicle must conform to all Federal and Delaware Motor Vehicle Laws. In addition the unit shall as a minimum, comply with all applicable Federal Safety Standards, including, but not limited to the provisions of D.O.T. FMCSA regulations as applicable, O.S.H.A. Safety and Health Regulations for Construction. All component installers shall also conform to the latest recommendations, procedures, and regulations of the following: ASME, ASTM, API, AWS, FPS, ICC, ISO, JIC, MSS, NFPA, NEMA, NTEA, SAE, TIMA, and USAISI. 1.02 Body installer shall test the hydraulic capacity for all hydraulic circuits. This data shall be documented, using the chassis VIN. This data should be given to the City of Seaford no later than upon delivery of the unit to the City. The data shall contain at a minimum, component manufacturers minimums, maximums, and actual readings on these components mounted on the unit.
