Specifications include, but are not limited to: • Double-sided, freestanding wall. • Both primary wall faces must be silicone edge graphic (SEG) fabric panels. • Frame composed of extruded aluminum (or similar strong lightweight material) mounted on sturdy base plates Silicone edge graphic panels must be available in a color and/or graphic/image design selected and/or provided by the consumer. Dye sublimation development preferred. Fabric panels must be 100% opaque (and not permit light to pass through the panel and effect the color or graphic image). • Wall must have a depth (thickness) of at least 6” Wall frames should be designed, or have a feature, that allows the frame to be connected to another of the fabric walls or to components of an exhibit in a way that does not damage the frame. • Wall frames must have a design feature that discretely allows a cable to be attached to the top of the wall (the cable should not obscure any part of either face of the wall) • Wall frames must be easily disassembled for shipping and storage. • Assembly to be completed using standard tools and no more than 3 people. • Fabric SEG wall panels must be easily attached and removed from the frame in a manner that does not damage the frame and allows for reuse of the frame. Thus allowing for replacement of fabric panel with a different fabric SEG panel displaying different graphics and/or colors. Producer must provide detailed specifications of frame design and materials. • Producer must provide instructions for assembling the frame and attaching the fabric panels. • Producer must be able to provide the fabric SEG panels for both the initial purchase of the walls and be able to provide replacement SEG panels that can be used on the frame. Flat (straight) rectangular walls: • Each 10’ tall and 12’ wide with a minimum depth of 6” • SEG fabric panel must extend from the floor to a height of 10’ (no gap between the bottom of the wall and the top of the wall) Flat (straight) rectangular walls: • Each 10’ tall and 6’ wide with a minimum depth of 6” • SEG fabric panel must extend from the floor to a height of 10’ (no gap between the bottom of the wall and the top of the wall) Curved Walls • Each 10’ tall and 12’ wide and a minimum depth of 6” • SEC fabric panel must extend from the floor to a height of 10’ (no gap between the bottom of the wall and the top of the wall)
