Specifications include, but are not limited to: a) The vehicle Manufacturer's model name AND model number shall be indicated in the bid proposal. All manufacturer option codes requested in the minimum vehicle specification requirements shall be listed on the Appendix B – Pricing spreadsheet. Failure to properly identify the model and all associated option codes may result in the vendor’s response being deemed nonresponsive. b) Standard solid exterior colors with standard interior trim shall be selected after the award is made unless otherwise indicated in the bid. c) Tire size and type shall be original equipment brand as indicated in the bid or specification sheet. d) Each vehicle shall include all required equipment as listed in this specification unless deletion is listed in the bid. e) The vehicle shall be new and of the model year, or newer, indicated in the bid. f) The vehicle specifications provided show the MINIMUM requirements for each police vehicle requested. g) The vehicle shall include all genuine parts, accessories and equipment considered standard by the manufacturer for the vehicle offered by the bidder. h) If items listed under Options on specification sheets are desired they must be specified by the Using Agency. These items shall not be furnished by the contractor unless specified in the specific agency Purchase Order. i) Each vehicle shall be clean, lubricated and serviced ready for immediate service. j) Each vehicle shall be protected to 20 degrees Fahrenheit below zero with permanent type antifreeze. k) Each vehicle shall include 1/2 filled fuel tank(s) or 10 gallons whichever is less. l) Each vehicle shall be free of dealer signs and emblems. m) Each vehicle shall conform to the requirements of the Delaware Motor Vehicle Code. n) The vehicle shall comply with all applicable Federal Motor Vehicle Safety Standards.
