Specifications include, but are not limited to: The selected vendor(s) shall provide a quote of the below requirements1.General Requirements If needed, provide and install control wiring between HVAC control panel andfield control devices. Install controls necessary for the entire system to have fail-safe operation. The BMS shall provide management, control and monitoring of the Chillers,Air Handlers, Exhaust System, Fume Hoods,Variable Air Volume Controllers(VAV) and Boilers, resulting in a fully-integrated system. This will include theinstallation of hardware and software. The system shall be client/server based. Control sequences and functions including alarms, monitoring and resettingfunctions, and operational sequences shall not be limited to point schedules andsequences of operation. Contractor to pre-schedule all work well in advance to eliminate possibility ofoperational disruptions. Install new set points in the BOD room to monitor temperature and humidity. The vendor shall supply a Commissioning Test Plan that will include a checklistthat has been agreed upon by SAWS. The vendor shall test the system in accordance with the approved test plan. The vendor shall include a Software Support Agreement for a period of 3years. 2.Performance Requirements: Design control system and equipment to performunder the following conditions Temperature, Ambiento Summer maximum 105 DB73 WB degrees Fo Winter minimum 26 DB degrees Fo Based on ASHRAE Handbook Fundamentals weather data for the City ofSan Antonio, Texas Temperature, Indooro Heated and Ventilated Process areas: Summer maximum 103 degreesF winter minimum 50 degrees F.o Air conditioned non-process Areas: Summer maximum 75 degrees Fwinter minimum 70 degrees Fo Laboratory: Summer maximum 72 degrees F winter minimum 72degrees F. Compatibility Compatibility shall be defined aso Ability to upgrade existing field panels to current level of technologyand extend new field panels on previously installed network.o Ability for any existing field panel microprocessor to be connected anddirectly communicate with new field panels without bridges, routers, orprotocol converters. Maintain temperature and humidity when fume hoods are opened The ability to send alarm and email alerts related to the BOD incubator, walk-in coolers, air handler units, and specialty gas. Ability to turn on and off, reset or override alarms for the Chillers, Air HandlerUnits, and Exhaust System
