Specifications include, but are not limited to: Submittal of furniture should include cost for selecting mid-grade finishes as the basis for design. Colors: UND uses a variety of colors including UND Green (Pantone 347), Black and various shades of Gray. No light colored fabrics, laminates or painted surfaces will be accepted. If you submit items. Provide at a minimum (28) 6 person D-shape standard height tables – minimum dimension of assembled table(‘s) must be no less than 56”W X 70”L 60”-66” Width X 72”-78” Length preferred but not required. Flip top mechanisms shall be included to allow the tops to be rotated vertically and stored in a nested configuration. “T” style table legs recessed under table edge preferred to facilitate the user to fully slide under the table edge without table leg interference. Table arrangement can be a combination of tables to create the D-Shape – Reference Attachment #003 If more than a single table is proposed to create the D-Shape, a tool less mechanical ganging bracket shall be provided to allow the D-Shape tables to be mobile as a single table. A minimum of (4) integrated tabletop electrical outlet shall be provided per 6-person DShape table. Electrical ports should allow for easy access from anyone at the table. Electricity will be supplied either at a wall or through a floor box depending on location. If more than a single table is proposed and the electrical ports are located in multiple tables, an electrical gang style connection shall be provided to “daisy chain” the table’s electrical components to a single cord. Each table shall include a cable management system for electrical cabling with the color, green please match UND colors as close as possible. The proposal review committee will have final approval / disapproval based on color transfer accuracy. The furniture is intended to be reconfigurable in the space and moved for janitorial services, please take into consideration the weight of the furniture. The Room Specific Requirements below will call out glides, castors, lockable casters or a combination, standard height vs. café height, etc... – In the event that a substitution is made please clearly note what the substitution is on the plan view and specification sheet / cut sheet for each substitution.
