Specifications include, but are not limited to: 15-056 MSRP - MASTER VALVE BOX, COMPLETE UNIT: Valve which controls the water supply to a residence building and its outside hydrants will be a full port brass ball valve having nominal restriction to flow, with a bleed orifice and a master cut off valve box which is approximately twelve by eighteen inches (12"x18") and sufficiently deep enough to allow three inches (3") of "pea" gravel to exist inside the box and allow approximately 3" of clearance between the valves and the gravel. 15-306 MSRP - SEWER SERVICE, COMPLETE: 15-306: Replace/Install with 4" PVC. (Includes double clean-out) in accordance to 15-306 and meet specification #02-220 (Excavating, proper compacting and back-filling holes or trenches included) Comments: To the side of the house 15660E MSRP - METAL CAGE (COMPRESSOR): All openings shall be sealed or capped that can collect water. 16-600J MSRP - ELECTRICAL-SERVICE PANEL - 200 AMP: 16-600J: COMPLETE with green tag. (Install/Replace). Installation is to include 200 amp service panel, meter box, service mast, mast head ,etc. and sealing of all holes and penetrations such as flashing and sealant. Installation will include re-connection fee. Permit must reflex the actual work being performed such as electrical panel (service upgrade, etc.). These can be indicated under the notes section on the online application. All materials and/or equipment demolished or repaired are considered salvage and belong to the homeowner for use or disposal unless the homeowner relinquishes salvage rights to the contractor (Contractors Bid Accordingly). The contractor must remove all unwanted material and debris.
