Specifications include, but are not limited to:Work Included: Furnishing of all coordination, labor, superintendence, materials, tools, cranes, equipment and sources necessary for the complete installation or modification of the following systems as shown on the plans and as herein specified. It is the intent of these specifications that the Contractor shall furnish and install a system complete in every respect and ready to operate. All miscellaneous items and accessories required for such installation and for the correct and convenient operation of the entire installation whether or not each such item or accessory is shown on the plans or mentioned in these specifications shall be furnished and installed. The contractor shall have an English speaking supervisor on the job at all times while employees are on the job site. Drawings and Division 0 apply to this Section. 2. Codes, Standards, and Permits: Comply with all local requirements. All work shall be in strict accordance with all applicable laws and codes, including but not limited to the following: a. National Electrical Code; Latest Edition b. Occupational Safety and Health Administration Standards including (but not limited to) OSHA Standard 2207 - Construction Industry Standards c. Applicable State Codes & Laws d. City Codes and Code Modifications, & Adopted Codes & Ordinances. e. National Fire Protection Association f. Texas Department of Health g. International Building Code, 2000 h. Vernon's Law - State of Texas i. International Mechanical Code, 2000 j. International Plumbing Code, 2000 k. Environmental Protection Agency l. International Gas Code m. Texas Department of Labor Boiler Rules and Regulations n. NFPA 90A o. American Society of Heating, Refrigerating, and Air Conditioning Engineers. p. Clean Air Act and Amendments.
