Please see attached RFQ for all details about this opportunity.
AMENDMENT 0001: 10/02/2025
Solicitation amended to answer industry questions.
QUESTION:
We need to know the INLET pressure of the compressed air. We can mount a pressure regulator so you can control it to your required pressure; Outlet Pressure Range: 5–15 PSIG.
ANSWER: The units produce the pressure, there is not a specification for an inlet pressure. We need a minimum output of 15PSI with 4 ports.
QUESTION:
Is there a technical contact / requestor I could communicate with to better understand the application?
ANSWER:
All questions may be send to maria.d.diaz-sotomayor.civ@us.navy.mil
QUESTION:
Is there a specific process to submit these (quotes)?
ANSWER:
Quotes shall be submitted via email to maria.d.diaz-sotomayor.civ@us.navy.mil
AMENDMENT 0002: 10/06/2025
Solicitation amended to answer industry questions.
QUESTION:
The greatly varying Output capacity, listed as 350-550 SCFD. Usually capacities for compressed air are listed as CFM or SCFM, so I do not know if this was a typo or not. Also, if the spec is for SCFM, the capacity figures of 350-550 SFCM covers 3 different size models.
ANSWER:
Normal 350 SCFD, or 0.24 SCFM.
QUESTION:
What is the dewpoint requirement? -40 or -100F
ANSWER:
No dewpoint requirement, so either is acceptable.
QUESTION:
What is the Hz on the electrical 50 or 60hz?
ANSWER:
60 Hz
