N66604-25-Q-0485-0003 – 8/25/2025
This amendment involves the following:
- Reopens the RFQ period from 8/25/2025 to 9/2/2025 at 2pm ET;
- Removes the Options and;
- Restructures the CLINs to 0001 through 0008
- Increases the quantities as listed below:
0001 Stave/Telemetry Flex CCA P/N 8481986-1 QTY 564
0002 Stave Signal Conditioner/Digitizer CCA P/N AN002150 QTY 2885
0003 Stave Interconnect CCA P/N AN002160 QTY 562
0004 Circuit Card Assembly, Telemetry P/N AN003008 QTY 415
0005 Circuit Card Assembly, Telemetry Interface P/N AN003004 QTY 415
0006 Circuit Card Assembly, SOM P/N GP000901 QTY 417
0007 Circuit Card Assembly, Controller P/N AN004011 QTY 52
0008 Circuit Card Assemblies P/N GP000901R1 QTY 8
Required delivery of November 14, 2025, or sooner, required. No other changes are made at this time. See attached for full details, terms and conditions.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
N66604-25-Q-0485-0002 – 6/26/2025
This amendment clarifies the option exercise interval described in 52.217-7 Option for Increase Quantity-Separately Priced Line Item:
52.217-7 Option for Increase Quantity-Separately Priced Line Item
The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor within the timing indicated in the table below. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree.
Option Exercise 1 - Within 6 months from base award
Option Exercise 2 - Within 6 months from base award
Option Exercise 3 - Within 6 months from base award
(End of clause)
--------------------------------------------------------------------------------------------------------------------------------------------
N66604-25-Q-0485-0001
This amendment adjusts CLIN 0020 to read “Circuit Card Assembly, SOM Option Exercise 3”. No other changes are made at this time.
--------------------------------------------------------------------------------------------------------------------------------------------
N66604-25-Q-0485
PLEASE READ THIS ENTIRE NOTICE CAREFULLY AS IT CONSTITUES THE ONLY NOTICE THAT WILL BE ISSUED.
This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6-Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation will not be issued. In accordance with FAR 5.203(a)(2) this solicitation will be posted for less than fifteen (15) days.
Incorporated provisions and clauses are those in effect through the most current Federal Acquisition Circular (FAC). This requirement is being solicited as a 100% small business set aside as concurred with by the Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) Office of Small Business Programs (OSBP). The North American Industry Classification System (NAICS) Code is 334118 – Computer Terminal and Other Computer Peripheral Equipment Manufacturing. The Small Business Size Standard is 1,000 employees.
The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) intends to purchase on a Firm Fixed Price (FFP) basis build to print circuit card assemblies in accordance with Government drawings, with options to buy for an additional 3 option exercises at 6-month intervals.
See attached RFQ for complete details, CLINs, requirements, and terms.
This requirement contains drawings that are designated as Distribution Statement D/Export Controlled. Distribution is authorized to the Department of Defense (DoD) and United States DoD contractors with a valid Joint Certification Program (JCP) certification. Only offerors with an active registration in JCP will be provided access to the technical specification drawings.
In order to obtain access to the drawings, the offeror’s JCP Custodian shall email amy.k.prisco.civ@us.navy.mil AND michelle.e.weigert.civ@us.navy.mil and attach a copy of the company’s valid DD2345. The request must be sent by the JCP Custodian; the drawings will not be provided to any other points of contact. Once JCP certification and JCP custodian are confirmed, the drawings will be sent to the JCP Custodian via DoD SAFE.
