The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The award determination will be Lowest Price Technically Acceptable principles. The required items are for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.
The Contract Line Items (CLINs) are as follows:
CLIN 0001
QTY 3 EA
PN: C03197
OEM: PH TOOL
ALLOY 1018 STEEL, BARE, SUPPLIED BY PH TOOL
SIZE: 1.000in WIDE X 2.000in TALL X 14.000in LONG
SIDE-DRILLED HOLES QTY 9 3-64in DIAMETER
BLOCK CONSISTS OF 2 SCANNING SURFACES
SURFACE FINISH 125 RA OR BETTER ON SCANNING SURFACES, AND 32 RA OR BETTER OTHER SURFACES.
SPEC BASED ON PH TOOL DRAWING NO. 10209
CLIN 0002
QTY 3 EA
PN: C03198
OEM: PH TOOL
ALLOY 1018 STEEL, BARE, SUPPLIED BY PH TOOL
SIZE: 1.000in WIDE X 2.000in TALL X 14.000in LONG
SIDE-DRILLED HOLES QTY 9 3-64in DIAMETER
BLOCK CONSISTS OF 2 SCANNING SURFACES
SURFACE FINISH 125 RA OR BETTER ON SCANNING SURFACES, AND 32 RA OR BETTER OTHER SURFACES.
SPEC BASED ON PH TOOL DRAWING NO. 10209
CLIN 0003
QTY 3 EA
PN: C03199
OEM: PH TOOL
ALLOY 1018 STEEL, BARE, SUPPLIED BY PH TOOL
SIZE: 1.000in WIDE X 2.000in TALL X 14.000in LONG
SIDE-DRILLED HOLES QTY 9 3-64in DIAMETER
BLOCK CONSISTS OF 2 SCANNING SURFACES
SURFACE FINISH 125 RA OR BETTER ON SCANNING SURFACES, AND 32 RA OR BETTER OTHER SURFACES.
SPEC BASED ON PH TOOL DRAWING NO. 10209
CLIN 0004
QTY 3 EA
PN: C03202
OEM: PH TOOL
ALLOY 1018 STEEL, BARE, SUPPLIED BY PH TOOL
SIZE: 1.000in WIDE X 2.000in TALL X 14.000in LONG
SIDE-DRILLED HOLES QTY 9 3-64in DIAMETER
BLOCK CONSISTS OF 2 SCANNING SURFACES
SURFACE FINISH 125 RA OR BETTER ON SCANNING SURFACES, AND 32 RA OR BETTER OTHER SURFACES.
SPEC BASED ON PH TOOL DRAWING NO. 10209
CLIN 0005
QTY 2 EA
PN: C03203
OEM: PH TOOL
EPRI-STYLE AXIAL SCAN PHASED ARRAY TEST BLOCK – 2 SIDED
ALLOY 70-30 CUNI, SUPPLIED BY PH TOOL
SIZE 1.000in WIDE X 2.000in TALL X 14.000in LONG
SIDE-DRILLED HOLES QTY 9 @ 3/64in DIAMETER
CLIN 0006
QTY 2 EA
PN: C03203
OEM: PH TOOL
EPRI-STYLE AXIAL SCAN PHASED ARRAY TEST BLOCK – 2 SIDED
ALLOY 70-30 CUNI, SUPPLIED BY PH TOOL
SIZE 1.000in WIDE X 2.000in TALL X 14.000in LONG
SIDE-DRILLED HOLES QTY 9 @ 3/64in DIAMETER
CLIN 0007
QTY 2 EA
PN: C03204
OEM: PH TOOL
EPRI-STYLE AXIAL SCAN PHASED ARRAY TEST BLOCK – 2 SIDED
ALLOY 70-30 CUNI, SUPPLIED BY PH TOOL
SIZE 1.000in WIDE X 2.000in TALL X 14.000in LONG
SIDE-DRILLED HOLES QTY 9 @ 3/64in DIAMETER
The requirement is a 100% small business set-aside, brand name solicitation. The NAICS code applicable to this procurement is 334516, Analytical Laboratory Instrument Manufacturing with a size standard of 1,000. The Product Service Code is 6635 Physical Properties Testing And Inspection. The anticipated delivery date for this acquisition is 10 WEEKS after contract award. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only.
The solicitation number is SPMYM125Q0100, and will be available 09 JUNE 2025 and posted to SAM.gov, https://sam.gov/. Quotes will be due by 09:00 AM EST on 13 JUNE 2025. Responses to the solicitation notice shall be emailed to the attention of Steven Treherne at steven.treherne@dla.mil. Please make sure that the solicitation number (SPMYM125Q0100) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.
Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for the inability of the Offeror's to access solicitation documents posted. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.
All responsible sources may submit a proposal which may be considered by the Government. By submitting an offer, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates, and procedures. Please direct all questions regarding this requirement to Steven Treherne at steven.treherne@dla.mil.
