< Back to results

SAW HEAD ASSEMBLY

Location

Washington

Publication Date

06/05/2025 12:25 PM EDT

Closing Date

06/12/2025 01:00 PM EDT

Issuing Organization

DEPT OF DEFENSE - DEFENSE LOGISTICS AGENCY - DLA MARITIME

Solicitation Number

Registered members only

Description

SOURCES SOUGHT SYNOPSIS - SAW HEAD ASSEMBLY

The Defense Logistics Agency Maritime Puget Sound is issuing this sources sought and request for information as a means of conducting market research to identify parties having an interest in and the resources to support a material requirement in Bremerton, WA.

SAW HEAD ASSY – QTY 4

RECIPROCATING SAW HEAD ASSEMBLY

PART NUMBER 11-034-404
MFG: E.H.WACHS

SPINDLE ASSY – QTY 2

HYDRAULICALLY POWERED SPINDLE ASSEMBLY WITH 10"-12" Z-AXIS TRAVEL FOR REPLACING EXISTING BRIDGEPORT'S MILLING ARRANGEMENTS

INCLUDES HYDRAULIC DRIVE MOTOR

EXTREME LOAD DAMPENING BLOCKS

FLOW DISPLAY WITH SPEED CONTROL

RAPID ADVANCE POSITIONING HANDLE

SPINDLE CHUCK ASSEMBLY

DIGITAL DEPTH INDICATOR, POSITIVE LOCK-OUT DEVICES

LINEAR CARRIAGE MOUNTING INTERFACE AND ATTACHMENT HARDWARE.

PART NUMBER 19-048-5301.00
MFG: E.H.WACHS

LINEAR CARRIAGE ASSY – QTY 1

UNIVERSAL LINEAR CARRIAGE ASSEMBLY

COMPLETE WITH FEED DRIVE ASSEMBLY (11-034-405) AND BLOCK GUIDES (11-034-413)

PART NUMBER 11-034-412
MFG: E.H.WACHS

CURVED CARRIAGE ASSEMBLY – QTY 1

CURVED CARRIAGE ASSEMBLY

COMPLETE WITH FEED DRIVE ASSEMBLY (09-075-4023) AND BLOCK GUIDES (11-034-413)

PART NUMBER 09-075-4010
MFG: E.H.WACHS

HYDRAULIC POWER UNIT – QTY 2

MODEL HPU20 380-480V ELECTRIC MOTOR DRIVEN HYDRAULIC POWER UNIT

STANDARD OPTIONS INCLUDES; UL LISTED NEMA 4 ELECTRICAL CONTROLS POWER (50/60HZ 3 PHASE), VAC INPUT POWER, OVER TEMP SHUT OFF, LOW OIL LIGHT, REMOTE PENDANT CONTROL WITH A 12’ AND A 50’ EXTENSION CABLE FOR PERFORMING REMOTE STOP / START AND FLOW CONTROL, REMOVABLE BASE WITH NON-MARRING CASTERS, FIVE (5) POINT RIGGING / LIFTING SYSTEM, HEAT EXCHANGER COMPLETE WITH DIGITAL READOUT, ULTRA QUIET HELICAL HYDRAULIC GEAR PUMP, POWDER COAT FINISH & OPERATING MANUAL. SHIPPED WITHOUT HYDRAULIC OIL. SPECIFICATIONS: H X W X L 52.5" X 26” X 34.75” W/BASE. 30 GALLON TANK CAPACITY, 850 LBS OPERATING WEIGHT WITH BASE & HYDRAULIC OIL, FACTORY PRESSURE RELIEF SETTING 1800 PSI, VARIABLE FLOW FROM 3 - 18 GPM, ELECTRIC POWER REQUIREMENTS 380 - 480V (3 PHASE) 50/60HZ @ 50 AMPS AND 62 DB AT FULL FLOW. NOTE HPU IS SHIPPED WITHOUT HYDRAULIC OIL - AW32 OR AW46. UL CERTIFIED / LISTED.

PART NUMBER 14-000-35
MFG: E.H.WACHS

HYDRAULIC HOSE SET – QTY 2

45’ X ½” HYDRAULIC HOSE SET WITH QUICK DISCONNECTS

PART NUMBER 03-404-00

MFG: E.H.WACHS

The results of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 333515–Cutting Tool and Machine Tool Accessory Manufacturing

THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred.

If your organization has the potential capacity to provide these items, please provide the following information:

Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization, including vendor CAGE code; and,
Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability.

Responses are due in this office no later than 10:00 a.m. PDT, 12 JUNE 2025. Please send your capabilities statements and responses to this RFI via email directly to: jack.edwards@dla.mil

If you have any questions concerning this opportunity, please contact: jack.edwards@dla.mil

Attachments/Links

No attachments or links have been added to this opportunity.

Contact Information

Contracting Office Address