MUST BE NEW EQUIPMENT. NO REFURBISHED OR REBUILT.
Performance Specifications
Purchase Description – CLIN 0001
2024 Nordco Model TRIPP-HD Tie Inserter/Remover or equivalent
Model:
- Nordco 2024 Model TRIPP-HD Tie Inserter/Remover or equivalent
- For operation on standard 56.5" gauge track
- Machine must be new and unused, not reconditioned
Chassis:
- Heavy Duty Welded Center Beam Type Steel Frame
- Federal Yellow Paint Spec No. 535C-13538 Standard Paint
- Left Front Manual Anti-De-Rail
- 3 Lifting Eyes for Lifting Machine
- 4" Standard Bumpers Included
- 10 Keyhole Tie-downs welded on the Frame
- 1 each Front/Rear Tow Bar Chain Holder
- Mitten Style Standard Tow hitch
- Black Metal Lockable Tool Box (14"x32"x19") mounted to Frame
- Remote Lockable Fluid Drains - Color Coded
- 4" DOT Reflective Tape
Power Unit:
- Tier IV Final Diesel Engine
- Dry Type Air Cleaner
- 145 Gal. Diesel Fuel Tank Capacity
- Fuel Level Site Gauge on Tank
- High Temperature- Low Oil Pressure Warning
- Engine De-Rate and Warning System in Cab
- Murphy Engine System Display
- Standard Murphy Instrumentation including Engine Oil Pressure, Coolant Temperature, Hour Meter, Tachometer, Voltmeter
- Remote Lockable Engine Oil Drain
Propulsion System:
- 4 Wheel Hydraulic Motor driven Axle, Chain & Sprocket Propulsion Drive
- Travel Speeds up to 22 mph
- Solid Pillow Block Bearing Supported Axles (see upgrade option)
- Insulated Axles with Shunting Option
- 24" Diameter, Hub Mounted, Cast Steel Wheels
- Air Applied Cobra Style Brake Shoes
- Parking Brake - Spring Applied - Air Released - Pull to Apply
- Air Ride Travel Suspension
- 3 Second Travel Alarm
Lighting & Electrical:
- 24 VDC, Circuit Breaker Protected, Electrical System
- PLC Electrical Control System
- Two Each 4x6 LED Grote Travel Lights, Front & Rear
- Two Each 4x6 LED Grote Work Lights over Each Rail
- Two Each Red Marker/Brake Lights, Front & Rear
- Amber Strobe
- Master Disconnect Switch beside Battery Box
Cabin:
- One Man, Heavy-Duty, Fully Enclosed Fabricated Steel Cab
- Engine Driven Air Conditioner/Heater (Red Dot)
- Pressurizer is Standard
- 3 Speed Fan in Heater
- 1 Operator and Defrost Bi-directional Fans
- Tinted Windows, Safety Glass where equipped with Wipers
- Lexan Tinted Windows where Safety Glass is not Installed
- Windshield Wipers - Forward and Reverse & Work Viewing Area
- Hydraulic Reservoir Temperature Gauge in Cab
- Fuel Level Gauge in Cab
- Speedometer
- Workhead Cycle Counter
- Air Trumpet Horns - 120 Db at 1 Meter
- Sliding Side Windows
- Log Book/Manual box - 12" x 13" x 4"
- Adjustable, Mechanical Suspension Operator's Seat with Seat Belt
- West Coast Type Mirrors
- International Control Symbols
- 12V, 20 AMP MOW Radio Circuit
- 2 Red Emergency Stop Button
- "Danger Live Track" Retractable Belt
- 5# ABC Fire Extinguisher
- First Aid Kit
Hydraulics:
- Single 170 Gallon Hydraulic Tank Capacity located behind Cab
- Dual, Pressure Compensated, Hydraulic Pumps 2500 psi
- Steel Manifold
- Electrical Control Valves
- Pressure & Return Line Filtration
- Joystick Type Hydraulic Operator Controls
- Cab Controlled Locks on Workhead Cylinders
- Electric Emergency Hydraulic Pump
- Lockable Suction Strainer 90 micron
- Filtered Manual Hydraulic Tank Fill System
- Thermostatically Controlled Oil Cooler
- 1" Quick Disconnect Filtration Loop Fittings
Tie Insertion / Removal Equipment:
- Heavy Duty Workhead
- Improved Wood Tie Gripper Assemblies with Dual Finger Inserts
- Automatic Rail Lift controls with Manual Override
- Two 82" Stroke Workheads to work on either side of track
- 12,880 lbs. Inserting Force
- 20,740 lbs. Removing Force
- Suitable for handling wood or concrete ties
General:
- Installation of Customer Supplied Decals
- Scissor Lockout-Tagout
- Lockable Battery Disconnect Switch
- Two Printed and One USB Electronic Maintenance, Operation and Parts Manuals w/recommended spare parts list
- 6 Month, 1000 Hours, First to Occur, Standard Warranty
- Delivery & Setup at McAlester Army Ammunition Plant, McAlester, OK
Weights & Dimensions:
- Estimated Shipping/Operating Weight 38,000 lbs.
- Est. Length 39'3"
- Est. Width 10'6"
- Est. Height 11' shipping - 11' 2" Operational
Additional Optional Equipment:
General:
- Back-Up Alarm, Switchable for Direction of Travel
- Extra Parts/Operation/Maintenance Manual Box
- Rail Sweeps (Ahead of front/behind rear wheels) - Vertical Rubber Flap
- Two Additional Keyhole Tiedowns (Front & Rear)
CAB:
- 12V, 20 AMP MOW Radio Circuit
- 3/5 Second Timer Backup Alarm
- Interior Cab Lights LED
- Low Hydraulic Oil - High Hydraulic Oil Temp Alarm
- Pressure Gauge for System Hydraulic Circuit in Cab
- Suspension Seat Upgrade
Lighting:
- All lights turn ON with Battery Switch
- UPGRADE Perimeter Lighting to GROTE LED
- Upgrade Work Light to Grote LED
Maintenance:
- Extra Parts/Operation/Maintenance Manuals (2)
- Fuel Level Site Gauge on Tank with Cage
- Lockable Battery Switch
- TRIPP Spare Parts Package
Storage:
- Track Tool Box (8x8x64), w/Tow Bar, D Handle Hitch Pins & Bumper Extensions
TRIPP:
- Front and Rear Mounted Camera with Display in Cab
Purchase Description – CLIN 0002
2024 Nordco CX Hammer Production Spike Driver or equivalent
Model:
- Nordco Model CX Hammer Production Spike Driver or equivalent
- Standard Boom & Winch configuration
- For operation on standard 56.5”-gauge track
- Machine must be new and unused, not reconditioned
Chassis:
- Federal Yellow Paint Spec No. 535C-13538 Standard Paint
- Heavy Duty Welded Steel Frame
- Lifting Bail for Lifting Machine
- Positive Locking Turntable w/ Aluminum Base
- 4” Standard Bumpers Included
- 16 Keyhole Tie downs
- Mitten Style Standard Tow hitch
- Black Metal Lockable Toolbox (11”x11”x25”) mounted to Frame
- Turntable Safety Interlock with Warning Light & Buzzer
Power Unit:
- Tier IV Final Diesel Engine
- 120 Gal. Diesel Fuel Tank Capacity
- Dry Type Air Cleaner
- Fuel Level Site Gauge on Tank
- Fuel Gauge in Cab
- High Temperature- Low Oil Pressure Warning
- Engine De-Rate and Warning System in Cab
- Murphy Engine System Display
- Standard Murphy Instrumentation including Engine Oil Pressure, Coolant Temperature, Hour Meter, Tachometer, Voltmeter
- Remote Engine Oil Drain
- Remote Fluid Drains - Color Coded
Propulsion System:
- 4 Wheel Hydraulic Motor driven Axle, Chain & Sprocket Propulsion Drive
- Travel Speeds Variable up to 25 MPH
- Solid Pillow Block Bearing Supported Axles (FYH standard bearing-see upgrade option)
- Insulated Axles with Shunting Option
- 16" Diameter, Hub Mounted, Cast Steel Wheels
- Cobra Style Brake Shoes
- Parking Brake - Spring Applied - Hydraulic Release Brakes
- Travel Alarm - Switchable for Direction of Travel
Lighting & Electrical:
- 24 VDC, Circuit Breaker Protected, Electrical System
- PLC Electrical Control System
- Two Each Grote LED Travel Lights, Front & Rear
- Two Each Grote LED Work Lights over Each Rail
- Two Each LED Red Marker/Brake Lights, Front & Rear
- Amber Strobe
- Master Disconnect Switch beside Battery Box
Cabin:
- Semi-Enclosed Cab, Top of roof painted white
- Engine Driven Air Conditioner & Heater (Red Dot)
- 3 Speed Fan in Heater
- 4 Operator and Defrost Bi-directional Fans
- Tinted Lexan Windows, Safety Glass where equipped with wipers
- Windshield Wipers - 2 Forward and 2 Reverse
- Hydraulic Reservoir Temperature Gauge in Cab
- Electric Trumpet Horns
- Log Book/Manual box - 12" x 13" x 4"
- Adjustable, Mechanical Operator's Seats w/ Seat Belts
- Seating for two Spike Gun Operators and one Feed Tray Operator
- West Coast Type Mirrors
- 12V, 20 AMP MOW Radio Circuit
- International Control Symbols
- 3 Red Emergency Stop Buttons
- 2 each 5# ABC Fire Extinguisher
- First Aid Kit
- "Danger Live Track" Retractable Belt
Hydraulics:
- 110 Gallon Hydraulic Tank Capacity
- Single Pressure Compensated Hydraulic Pump 2500 psi
- Steel Manifold
- Electrical Control Valves
- Pressure & Return Line Filtration
- Joystick Type Hydraulic Operator Controls
- Cab Controlled Locks on Workhead Cylinders
- Lockable Suction Strainer 90 micron
- Filtered Manual Hydraulic Tank Fill System
- Electric Emergency Hydraulic Pump
- Thermostatically Controlled Oil Cooler
- 1" Quick Disconnect Filtration Loop Fittings
Spike Driving Equipment:
- Reciprocating Hammer Driving Action
- Remote, Electric Spike Pattern Adjustment
- Digital, Variable Roller Gauger
- Insulated Gauger
- Automatic Tie Nipper
- Boom & Winch for loading spike kegs
- Hook Style Deflector Mat
General:
- Installation of Customer Supplied Decals and 4” DOT Reflective Tape
- Scissor Lockout-Tagout
- Lockable Battery Disconnect Switch
- Two Printed and One USB Electronic Maintenance, Operation and Parts Manuals w/recommended spare parts list
- 6 Month, 1000 Hours, First to Occur, Standard Warranty
- Delivery & Setup at McAlester Army Ammunition Plant, McAlester, OK
Weights & Dimensions:
- Estimated Shipping/Operating Weight 30,000 lbs.
- Est. Length 25' 8"
- Est. Width 8' 6"
- Est. Height 9' 10"
Additional Optional Equipment:
General:
- Back-Up Alarm, Switchable for Direction of Travel
- Extra Parts/Operation/Maintenance Manual Box
- Rail Sweeps (Ahead of front/behind rear wheels) - Vertical Rubber Flap
- Two Additional Keyhole Tiedowns (Front & Rear)
- Corner Mounted Machine Jackstands
CAB:
- 12V, 20 AMP MOW Radio Circuit
- 3/5 Second Timer Backup Alarm
- Cab Filtered Air Pressurizer
- Dedicated Cab Fan for Operator
- Interior Cab Lights LED
- Low Hydraulic Oil - High Hydraulic Oil Temp Alarm
- Pressure Gauge for System Hydraulic Circuit in Cab
CX SPIKER UPGRADES:
Lighting:
- All lights turn ON with Battery Switch
- UPGRADE Perimeter Lighting to GROTE LED
- Upgrade Work Light to Grote LED
Maintenance:
- Extra Parts/Operation/Maintenance Manuals (2)
- Fuel Level Site Gauge on Tank with Cage
- Lockable Battery Switch
SPIKER:
- Spiker Spare Parts Package
Purchase Description – CLIN003
2024 Nordco SS Small Spiker or equivalent
Model:
- Nordco Model SS-C Spiking Machine or equivalent
- For operation on standard 56.5" gauge track
- Machine must be new and unused, not reconditioned
Chassis:
- Heavy Duty Welded Steel Frame
- Lifting Bail for Lifting Machine
- Positive Locking Turntable w/ Aluminum Base
- 12" Standard Bumpers Included
- Keyhole Tie downs
- Mitten Style Standard Tow hitch
- Tool Box
Power Unit:
- Diesel Engine Tier IV Final
- High Temperature- Low Oil Pressure Shut-Down System
- 35 Gal. Diesel Fuel Capacity
- Fuel Level Site Gauge on Tank
- Engine Oil Drain
- Fluid Drains - Fuel Tank and Hydraulic Filter Loop
- Murphy Engine System Display
- Electric Start with Neutral Start Feature
- Engine De-Rate and Warning System in Cab
- High Temperature- Low Oil Pressure Warning
Propulsion System:
- 4 Wheel, Dual Axle Hydraulic Motor, Chain & Sprocket Propulsion Drive
- Solid Pillow Block Bearing Supported Axles - Rexnord
- Insulated Axles with Shunting Options
- 16" Diameter, Hub Mounted, Cast Steel Wheels
- Cobra Style Brake Shoes
- Spring Applied - Hydraulic Release Brakes
Lighting & Electrical:
- 12 VDC, Circuit Breaker Protected, Electrical System
- Two Each GROTE LED Travel Lights, Front & Rear
- Two Each GROTE LED Work Lights over Each Rail
- Two Each LED Red Marker/Brake Lights, Front & Rear
- Amber Strobe
- Back-Up Alarm- Switchable for Direction of Travel
Cabin:
- Canopy Roof, roof top painted white
- Electric Horns
- Log Book/Manual box
- Adjustable, Operator's Seats w/ Seat Belts
- West Coast Type Mirrors
- Standard Instrumentation including Engine Oil Pressure, Coolant Temperature, Hour Meter, Tachometer & Voltmeter
- Engine Warning Lights
- Hydraulic Reservoir Temperature Gauge in Cab
- International Control Symbols
- 1 Red Emergency Stop Button
- 5# ABC Fire Extinguisher
- First Aid Kit
Hydraulics:
- Single Pressure Compensated Hydraulic Pump 2500 psi
- Steel Manifold
- Electrical Control Valves
- Pressure & Return Line Filtration
- Filtered Manual Hydraulic Tank Fill System
- Electric Emergency Hydraulic Pump
- Thermostatically Controlled Oil Cooler
- Lockable Suction Strainer 90 micron
- 1" Quick Disconnect Filtration Loop Fittings
Spike Driving Equipment:
- Reciprocating Hammer Driving Action
- Remote, Hydraulic Spike Pattern Adjustment
- Tie Nipper
- Hydraulic Gauging Attachment
- Boom & Winch for loading spike kegs
General:
- "Danger Live Track" Retractable Belt
- Installation of Customer Supplied Decals and 4” DOT Reflective Tape
- Scissor Lockout-Tagout
- Lockable Battery Disconnect Switch
- Two Printed and One USB Electronic Maintenance, Operation and Parts Manuals w/recommended spare parts list
- 6 Month, 1000 Hours, First to Occur, Standard Warranty
- Delivery & Setup at McAlester Army Ammunition Plant, McAlester, OK
Weights & Dimensions:
- Estimated Shipping/Operating Weight 16,500 lbs. - 17,700 lbs. w/Gauger
- Est. Length 19' - 6"
- Est. Width 8' - 6"
Additional Optional Equipment:
General:
- Extra Parts/Operation/Maintenance Manual Box
CAB:
- 12V, 20 AMP MOW Radio Circuit
- 3/5 Second Timer Backup Alarm
Maintenance:
- Extra Parts/Operation/Maintenance Manuals (2)
SPIKER:
- Spiker Spare Parts Package
Purchase Description – CLIN 0004
2024 Nordco Spike Puller SP2R Dual Rail Spike Puller or equivalent
Model:
- Nordco Model SP2R Tier IV, Dual Rail Spike Puller or equivalent
- For operation on standard 56.5" gauge track
- Machine must be new and unused, not reconditioned
Chassis:
- Heavy Duty Welded Steel Frame
- Rear Floating Frame
- Federal Yellow Paint Spec No. 535C-13538 Standard Paint
- Lifting Bail for Lifting Machine
- Positive Locking Turntable with Rail-to-Rail Base
- Standard Rubber Bumper
- 8 Keyhole Tiedowns
- Mitten Style Standard Tow hitch
- Turntable Safety Interlock with Warning Light & Buzzer
Power Unit:
- Cummins Tier IV 110HP Diesel Engine
- 2 Diesel Fuel Tanks- 42 and 48-Gallon Fuel Capacity
- Dry Type Air Cleaner
- Fuel Level Site Gauge on Tank
- Murphy Engine System Display
- Engine High Temperature- Low Oil Pressure Warning
- Engine De-Rate and Warning System in Cab
- Standard Instrumentation including Coolant Temperature, Hour Meter, Tachometer and Voltmeter
- Remote Lockable Engine Oil Drain
- Engine Oil Placard in Cab-Brand, Type and Quantity Including Filter
- Remote Lockable Fluid Drains - Color Coded
- Lockable Engine Doors
Propulsion System:
- 4-Wheel, Dual Axle, Hydraulic Motor, Chain & Sprocket Drive
- Solid Pillow Block Bearing Supported 3" Demountable Axles (FYH standard bearing-see upgrade option)
- Insulated Axles with Shunting Option
- 16" Diameter, Hub Mounted, Cast Steel Wheels
- Cobra Style Brake Shoes
- Parking Brake - Spring Applied - Hydraulic Release
- Travel Alarm - Switchable for Direction of Travel
Lighting & Electrical:
- 24 VDC, Circuit Breaker Protected, Electrical System
- Electrical Control System
- Two Each 4x6 Grote LED Travel Lights, Front & Rear
- Two Each 4x6 Grote LED Work Lights over Each Rail
- Two Each Trucklite Red Marker/Brake Lights, Front & Rear
- Amber Strobe
- Master Disconnect Switch beside Battery Box
- LED Light in Electric Cabinet
Cabin:
- Two Man, Fabricated Steel Cab, Roof Painted White
- Engine Driven Air Conditioner & Heater (Red Dot)
- 3 Speed Fan in Heater
- 2 Operator and Defrost Bi-directional Fans
- All windows Safety Glass
- Windshield Wipers - Forward and Reverse & Work Viewing Area
- Sliding Side Windows
- Hydraulic Reservoir Temperature Gauge in Cab
- Hydraulic Oil Temp Gauge
- Fuel Level Gauge
- Electric Trumpet Horns
- Log Book/Manual Storage
- Adjustable, Mechanical Operator's Seats w/ Seat Belts
- West Coast Type Mirrors
- 12V, 20 AMP MOW Radio Circuit
- International Control Symbols
- 1 Red Emergency Stop Button
- 5# ABC Fire Extinguisher
- First Aid Kit
- Window Tint All
Hydraulics:
- 97 Gallon Hydraulic Tank
- Single Pressure Compensated Hydraulic Pump 2500 psi
- Steel Manifold
- Electrical Control Valves
- Pressure & Return Line Filtration
- Joystick Type Hydraulic Operator Controls
- Lockable Suction Strainer 90 micron
- Filtered Manual Hydraulic Tank Fill System
- Electric Emergency Hydraulic Pump
- Thermostatically Controlled Oil Cooler
- 1" Quick Disconnect Filtration Loop Fittings
Spike Removal Equipment:
- "A" Frame Pulling Assembly Over Each Rail
- Improved Fore/Aft Guide Rod and Bushing System
- Claw Type Pulling Tools Pulls Spikes Straight for Re-Use
- Cab Controlled Hydraulic Work Head Locks
General:
- "Danger Live Track" Retractable Belt
- Installation of Customer Supplied Decals and 4” DOT Reflective Tape
- Scissor Lockout-Tagout
- Lockable Battery Disconnect Switch
- Two Printed and One USB Electronic Maintenance, Operation and Parts Manuals w/recommended spare parts list
- 6 Month, 1000 Hours, First to Occur, Standard Warranty
- Delivery & Setup at McAlester Army Ammunition Plant, McAlester, OK
Approximate Weights & Dimensions:
- Est. Shipping Weight 19,700 lbs.
- Est. Length 22' 6"
- Est. Width 8' 6"
- Est. Height 10' 2"
Additional Optional Equipment:
General:
- Rail Sweeps (Ahead of front/behind rear wheels) - Vertical Rubber Flap
- Two Additional Keyhole Tiedowns (Front & Rear)
CAB:
- 3/5 Second Timer Backup Alarm
- Cab Filtered Air Pressurizer
- Low Hydraulic Oil - High Hydraulic Oil Temp Alarm
- Pressure Gauge for System Hydraulic Circuit in Cab
- Suspension Seat Upgrade
Lighting:
- All lights turn ON with Battery Switch
Maintenance:
- Extra Parts/Operation/Maintenance Manuals (2)
SP2R Spare Parts Package
