Defense Logistics Agency (DLA) Data ProductionsOperations seeks to procure services to remove and install a new
racking system:
- One time requirement that must be completed in 30 days after award.
- Remove 54 cross beams and stacking for later use.
- Remove 10 uprights in the warehouse and stack on provided pallet outside.
- Install 10 new uprights following all manufacturer guidelines within the same footprint of the old uprights.
- Install 72 cross beams mirroring the new setup that has already been established in row l of the warehouse.
- Install wire decking (shelving) on bottom 2 rows (36 total).
Amendment 00001:
The closing date of SP7000-24-Q-0014 is extended to 24 June 2024 at 14:00.
- What is the height of the uprights? 25 ft (H) x 4 ft (D)
- What is the length of the beams? 9 ft
- Is a scissor lift needed? Yes, scissor lift would be recommended.
- Is a forklift needed? Yes
- Will ladders be sufficient for installation? Scissor lift would be recommended due to the height of the racks.
- Do ladders, forklifts, and scissor lift need to be provided or are they on site to be used? They will need to be provided.
- What size are the old uprights? 25 ft (H) x 3 ½ ft (D)
- What size are the old beams? 9 ft
- What size are the new uprights? 25 ft (H) x 4 ft (D)
- How many shelf levels is each bay? 4
- How much weight does each shelf level need to hold? 1200 LBS
- Can you provide picture or layout of old system? See attached
- Can you provide picture or layout of new system? The new layout will mirror the previous layout.
- Does the offeror need to include procurement of new racking materials, or will it be provided? The new racking material has been purchased and is on-site (minus bolts for uprights to floor).
- Are there drawings and pictures of the work area available? See attached.
- What does the area look like? See attached.
- Are site visits available? Yes, we can schedule a site visit M-F from 0700 to 1400 CST.
- What size cross beams and uprights are required to be demolished? Uprights are 25 ft (H) x 3 ½ ft (D) and cross beams are 9 ft wide.
- What size uprights, cross beams, and wire decking are being installed? Uprights to be installed are 25 ft (H) x 4 ft (D). Same cross beams need to be installed.
- Will equipment be needed to demo and install? Yes
- What material is being installed and demolished? DLA material is to be taken down and installed.
- What are the manufacturer’s guidelines for installation? Uprights and cross beams have been purchased through Granger and Uline. The uprights were manufactured by Husky Rack and Wire.
Amendment 0002:
Add Department of Labor Wage Determinations. Since this is a service contract above $2,500.00 wage determination is required.
