Specifications include, but are not limited to:The intent of this specification is to describe a cold planer milling attachment that mounts to a Bobcat S750 skid steer with high flow auxiliary hydraulics. The cold planer shall connect to the skid steer 7 or 14 pin wire harness for electric over hydraulic control. The cold planer hydraulic lines shall connect to the loaders factory flush face hydraulic couplers. The cold planer operation control will be from the skid steer fingertip handle controls. The cold planer shall be capable of milling asphalt and concrete with one drum with interchangeable picks and cutting rumble strips in asphalt with another drum. The cold planer shall be standard production of the latest model with standard accessories and in addition meet the following minimum specifications: COMPLY YES NO SPECIFICATION DEVIATIONS Universal dual purpose drum for both asphalt and concrete 1._____ _____ _____________________ a. Picks i. Asphalt cutting type _____ _____ _____________________ ii. Quantity 75 _____ _____ _____________________ b. 14" diameter minimum _____ _____ _____________________ c. 40" cutting width _____ _____ _____________________ d. 0-5 inch milling depth _____ _____ _____________________ e. Greasable or sealed type bearing _____ _____ _____________________ Hydraulic components 2. a. Hydraulic direct drive motor _____ _____ _____________________ i. 15,000 in-lbs torque _____ _____ _____________________ ii. Rated operating pressure 3000 PSI