Specifications include, but are not limited to:. The project includes 3 (three) individual workstations. No exceptions to the following specifications. . Cabinet Housing Construction 1.19 gauge steel top, bottom, and sidewall panels 2.16 gauge steel corner column, and top and bottom reinforcement: pre‐treat with a rust inhibitor 3.Painted with polyester epoxy‐hybrid powder coat paint . Doors 1.Surface mounted doors to allow for roll‐out tray behind. 2.Cabinet Handles must not protrude beyond the face of the cabinet. . Drawers 1.Flush with cabinet face, no protruding handles. 2. Handles full drawer width, at top, integrated into front and bottom of drawer, not attached. 3. Handles have plastic snap on cover that will permit exterior labeling. 4. Depth 24 inches, 100% full extension metal carriage and on Delrin rollers. 5. 440 lb minimum load capacity