Specifications include, but are not limited to:Extent of work of this section includes all labor, materials, equipment and services necessary for and reasonably incidental to providing the toilet and compartments as required by the drawings, and this specification section. Owner shall install the partitions. b. Successful bidder will submit five (5) sets of shop drawings with attached color selections for owner’s approval prior to fabrication. Color to be selected from manufacturer’s standards. c. Provide a one year warranty against workmanship and defects .02 MATERIALS a. All toilet compartments shall be floor mounted, overhead braced with 20 gauge panels, and pilasters and 22 gauge doors. Doors and panels shall be a minimum of 1” thick. Pilasters shall be 1-1/4” thick. Door, Panel, and pilaster construction shall consist of galvanized and bonderized zinc coated sheet steel laminated to a double-faced honeycomb core under pressure. Faceplates shall be welded together around entire perimeter. All edges shall be interlocked with roll-formed edge molding. All corners shall be welded smooth. b. Finish shall be baked enamel powder coating. c. Furnish with theft proof screws. d. Furnish with polished chrome hinges, latch, stop, keeper, coat hook and all necessary fittings and hardware for a complete installation