This is a combined synopsis/solicitation prepared in accordance with FAR Subpart 12.6, Agency number 140R6023Q0052 and is issued as a Request for Quotation (RFQ). This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-02.
This solicitation is a Small Business set-aside in accordance with FAR Part 19. The NAICS code for this order is 335314 Motor Starters, Contactors, and Controllers Industrial Manufacturing; PSC is 6110 Electrical Control Equipment, with a business size standard of 750 employees.
Bureau of Reclamation, Wyoming Area Office (WYAO) is seeking a bid solicitation from Contractors to supply the materials required to replace N1A at Kortes.
The salient characteristic requirements are supply the following materials (or equivalent):
1. 6 ea STARTER (per specifications)
STARTER 600VAC 18AMP NEMA +OPTIONS
Class 8536 Starter
8536SBG2V02S
NEMA Size 0
Non-reversing 3 phase
3 pole device
Type 1 Enclosure
Melting alloy overload
Starter will require 3 thermal units
Standard with NC overload contact
Specified for 460V 3Ph power system
Separate control source selected
with 120V 60Hz coil
Auxiliary contacts -
None
Control units supplied
None
Pilot lights supplied
None
2. 2 ea STARTER (per specifications)
STARTER 600VAC 27AMP NEMA +OPTIONS
Class 8536 Starter
8536SCG3V02S
NEMA Size 1
Non-reversing 3 phase
3 pole device
Type 1 Enclosure
Melting alloy overload
Starter will require 3 thermal units
Standard with NC overload contact
Specified for 460V 3Ph power system
Separate control source selected
with 120V 60Hz coil
Auxiliary contacts -
None
Control units supplied
None
Pilot lights supplied
None
3. 3 ea STARTER (per specifications)
STARTER 600VAC 45AMP NEMA +OPTIONS
Class 8536 Starter
8536SDG1V02S
NEMA Size 2
Non-reversing 3 phase
3 pole device
Type 1 Enclosure
Melting alloy overload
Starter will require 3 thermal units
Standard with NC overload contact
Specified for 460V 3Ph power system
Separate control source selected
with 120V 60Hz coil
Auxiliary contacts -
None
Control units supplied
None
Pilot lights supplied
None
4. 1 ea STARTER (per specifications)
STARTER 600VAC 135AMP NEMA +OPTIONS
Class 8536 Starter
8536SFG1V02S
NEMA Size 4
Non-reversing 3 phase
3 pole device
Type 1 Enclosure
Melting alloy overload
Starter will require 3 thermal units
Standard with NC overload contact
Specified for 460V 3Ph power system
Separate control source selected
with 120V 60Hz coil
Auxiliary contacts -
None
Control units supplied
None
Pilot lights supplied
None
5. 1 ea PANELBOARD (per specifications)
PANELBOARD INTERIOR NF 400A MLO 42CKT 3P
Consisting of
480Y/277V 3Ph 4W 60Hz SCCR: 14kA
Fully Rated
Suitable For Use As Service Entrance UL
Single Main: 350A/3P LA Circuit Breaker
Incoming Conductors: 1 - #1 - 600,(2)#1 - 250
kcml
AL Ground Bar
Bus: 400A Rated Copper: Silver/Tin Plated
42 Circuit Interior
Type 1,Box: 68H x 20W x 5.75D
Incoming: Bottom Trim: Surface - Hinged
Box Cat No: MH68 Front Cat No: NC68VSHR
Ref. Drawing: PBA554HR
Feeders:
1 - 100A/3P EDB
3 - 40A/3P EDB
1 - 30A/3P EDB
6 - 15A/3P EDB
1 - 25A/3P EDB
Optional Features:
Standard Panel (Box Ahead),Standard Solid
Neutral,Standard Ground Bar
1 - PK27GTA-LOAD CENTER EQUIPMENT GROUND BAR ASSY
1 - N400M-BREAKERLESS KIT
1 - LALLC-LA/LH IP2X LINE LUG COVER
1 - EDB34100-MINIATURE CIRCUIT BREAKER 480Y/277V 100A
3 - EDB34040-MINIATURE CIRCUIT BREAKER 480Y/277V 40A
1 - EDB34030-MINIATURE CIRCUIT BREAKER 480Y/277V 30A
6 - EDB34015-MINIATURE CIRCUIT BREAKER 480Y/277V 15A
1 - MINIATURE CIRCUIT BREAKER 480Y/277V 25A
1 - MOLDED CASE CIRCUIT BREAKER 600V 350A
1 - PANELBOARD ENCLOSURE/BOX TYPE 1 68H 20W
1 - PNLBD COVER/TRIM NOQD T-1 68H 26W
6. 1 ea PANELBOARD (per specifications)
PNLBD INT NQ 100A MLO 30 CKT 1P CU
Consisting of
120/240V 1Ph 3W 60Hz SCCR: 10kA
Fully Rated
Main Lug Only: 100A
Incoming Conductors: 1 - #6 - 2/0 AWG
AL Ground Bar
Bus: 100A Rated Copper: Silver/Tin Plated
30 Circuit Interior
Type 1,Box: 32H x 20W x 5.75D
Incoming: Bottom Trim: Surface - Hinged
Box Cat No: MH32 Front Cat No: NC32SHR
Ref. Drawing: PBA701HR
Feeders:
1 - 60A/2P QOB
11 - 10A/2P QOB
Optional Features:
Standard Panel (Box Ahead),Standard Solid
Neutral,Standard Ground Bar
1 - PK27GTA-LOAD CENTER EQUIPMENT GROUND BAR ASSY
1 - QOB260-MINIATURE CIRCUIT BREAKER 120/240V 60A
11 - QOB210-MINIATURE CIRCUIT BREAKER 240V 10A
1 - MH32-PANELBOARD ENCLOSURE/BOX TYPE 1 32H 20W
1 - NC32SHR-PNLBD COVER/TRIM NF T-1 S 32H 20W
7. 40 ft THHN-4/0-BLK-19STR-CU-RCL
8. 40 ft THHN-2/0-BLK-19-STR-CU-RCL
9. 40 ft THHN-1/0-BLK-19-STR-CU-RCL
10. 40 ft THHN-2-BLK-19STR-CU-RCL
11. 40 ft THHN-4-BLK-19STR-CU-RCL
12. 40 ft THHN-6-BLK-19STR-CU-RCL
13. 40 ft THHN-8-BLK-19STR-CU-RCL
14. 500 ft THHN-10-BLK-19STR-CU-500S/R WIRE
15. 1000 ft THHN-12-BLK-STR-CU-1000MINI-CP