Specifications include, but are not limited to: 1) Contractor shall include a complete bid that includes all repairs to walls and ceiling, if any, and match existing finishes. 2) Contractor shall include all modifications to existing cloud structure, if any, to accommodate new fixtures per the technical specifications – Exhibit A. a) Contractor to provided sealed/stamped drawings 3) Contractor is responsible for Electrical Contractor and associated scope indicated in the Electrical Scope indicated in the Comstock Responsibility Matrix a) Motorized Rigging i) Install (2) One, Quick Touch Preset 8 Controller with Custom Mounting Plate-Supplied by System Integrator ii) Supply and Install (4) Sets of control wires, Cat5e iii) Terminate Line Voltage (4) Fix speed motor starter box, for a 3 hp motor, max. Extend conduit and wiring to the motor starters and curtain motor from existing motor circuits iv) Terminate Line Voltage (2) Power Reels Gleason S241001-163-12-1, 50’ 12/7 Spring Lift Cable. Extend conduit and wiring to power control distribution as required. b) Architectural Light Controls i) Supply and Install (4) Net Wire, Cat5e 4) Contractor shall be responsible for protection of existing structures and space throughout the construction process. Care shall be taken to preserve the existing finishes – such as flooring, stage, staging, structure, and seating – to turn over to the University in the same condition it was in prior to construction. Contractor is solely responsible for dust control during the construction process and shall include steps to prevent or adequately clean any dust generated during their work. 5) Contractor shall be responsible for temporary storage of any materials or equipment as well as off-site disposal of any rubbish during the construction process. The Contractor shall preserve all fixtures removed during the construction process. The Contractor shall attach fixtures to an existing railing in the University-designated location within the School of Music. The University will not provide temporary storage or disposal of any other materials or equipment.
