Specifications include, but are not limited to: 1. Objective: Clatsop County is requesting Proposals to furnish all necessary labor, supervision, materials, equipment and supplies to satisfactorily perform custodial cleaning services at: Location “A” Public Services Buildings located at 800 Exchange Street and 820 Exchange Street, Astoria, Oregon Locations “B” Clatsop County Jail located at 1250 SE 19th Street, Warrenton, Oregon; Clatsop County Jail front Administration, Locker rooms, all Public visitation rooms And Staff offices, if open. 2. Nature and Scope of the Project: The following information is provided to assist the Contractor in understanding the scope of services needed by the County for its facilities. The County takes pride in providing an exceptionally clean and safe environment at all times for its visitors and employees, and expects the custodial services firm to demonstrate this same pride in their work performance. 3. Cleaning Standards: The following cleaning standards shall be used on a daily basis, and during the custodial inspection process, to assess the quality of cleaning performance. Successful contractor will need to use the inspection form provided by the County. A. ENTRANCES 1. Mats and Carpet - Shall be free of spots, stains, gum, dirt and debris without causing damage. They shall appear visibly and uniformly clean. Adjoining walls, doors and floor surfaces shall also be free of dust, soil and cleaner residue. 2. Glass and Metal Surfaces - Shall appear streak-free, film-free and uniformly clean. This shall include the elimination of dust and soil from sills and ledges, and heat registers. Includes interior and exterior of doors and adjacent glass. 3. Corners/Thresholds - Shall be free of dust, soil, finish build-up and debris. These areas shall appear visibly and uniformly clean. This shall include the elimination of cleaner residue. 4. Floors and Covebases - Shall be free of dust, soil, gum, spots, stains, scuffmarks and debris. Hard/resilient floors shall have multiple coats of a slip-resistant seal and finish applied in a manner that result in a consistent high shine. Floors shall appear visibly and uniformly smooth and clean. This shall include the elimination of dust streaks, lint, standing water, cleaner residue and film. Ceramic tile does not require finish coats. 5. Walls and Fixtures - Shall be free of dust, and soil without causing damage. These surfaces shall appear visibly and uniformly clean. This shall include the elimination of film, streaks and cleaner residue.
