Annual Supply of Anti-Freeze/Coolants/Windshield Washer Fluid

Specifications include, but are not limited to: 3. EXTENDED SERVICE AUTOMOTIVE ENGINE COOLANT/ANTIFREEZE – PREDILUTED 50/50 READY TO USE 2.1 Chemical Properties (typical values) 2.1.1 Specific Gravity 60/600 1.077 2.1.2 * Foam Test 50 ml./3 sec. 2.1.3 PH, 50% Volume Solution 8.5 2.1.4 Flash Point, COC 2500 F. 2.1.5 Total Water, Wt. % 5% 2.1.6 Total Glycois, Wt. % 95% 2.1.7 Effect on Automotive Finish None 2.1.8 Colored Yes Amber * With 15 lb. pressure cap 2.2 Meets or exceeds performance requirements of the following: 2.2.1 ANFOR R 15-601 2.2.2 BS 6580 (British Standard) 2.2.3 Chrysler MS7170 2.2.4 Chrysler MS9769 2.2.5 Chrysler MS12106 2.2.6 Ford ESE-M97B44-A 2.2.7 Ford WSS-M97B44-D 2.2.8 Ford WSS-M97B51-A1 2.2.9 FVV HEFT R443 (Germany) 2.2.10 GM 1825M 2.2.11 GMW3420 2.2.12 GM 6277M (DEX-COOL) 2.2.13 JASO M325 (Japan) 2.2.14 JIS K 2234 (Japan) 2.2.15 SAE J1034 2.2.16 Mercedes Benz DBL 7700 2.2.17 ASTM D3306 2.2.18 ASTM D4985 2.3 Freeze/Boil protection (15 lb. pressure cap) 2.3.1 40% of cooling system capacity 2.3.1.1 Freezing to -100 F. 2.3.1.2 Boiling to 2590 F. 2.3.2 50% of cooling system capacity 2.3.2.1 Freezing to -340 F. 2.3.2.2 Boiling to 2650 F. 2.3.3 60% of cooling system capacity 2.3.3.1 Freezing to -620 F. 2.3.3.2 Boiling to 2700 F. 3. EXTENDED SERVICE HEAVY DUTY ENGINE COOLANT/ANTI-FREEZE (FINAL CHARGE) 3.1 Chemical Properties (typical values) 3.1.1 Specific Gravity 60/600 1.126 3.1.2 * Foam Test 50 ml./3 sec. 3.1.3 PH, 50% Volume Solution 7.9 3.1.4 Flash Point, COC 2500 F. 3.1.5 Total Water, Wt. % 5% 3.1.6 Chloride, PPM 20 3.1.7 Reserve Alkalinity 7 3.1.8 Ash Wt. % 2 3.1.9 Effect on Automotive Finish None 3.1.10 Colored Yes Amber * With 15 lb. pressure cap 3.2 Meets or exceeds performance requirements and specifications of the following and be Organic Acid technology: 3.2.1 Caterpillar EC-1 3.2.2 Cummins 14603 3.2.3 Detroit Diesel 93K217 3.2.4 MAN 324 type SNF 3.2.5 MTU 5048 3.2.6 Navistar CEMS-B1-Type IIIA 3.2.7 Behr Radiator 3.2.8 Mercedes DBL 7700 3.2.9 TMC RP-329 3.2.10 ASTM DA7583 (John Deere Coolant Cavitation Test)/ASTM D6210 3.2.11 John Deere H24A1/C1 3.2.12 Volvo/Mack 3.3 Freeze/Boil Protection (15 lb. pressure cap) 3.3.1 40% of cooling system capacity 3.3.1.1 Freezing to -100 F. 3.3.1.2 Boiling to 2590 F. 3.3.2 50% of cooling system capacity 3.3.2.1 Freezing to -340 F. 3.3.2.1 Boiling to 2650 F. 3.3.3 60% of cooling system capacity 3.3.3.1 Freezing to -620 F. 3.3.3.2 Boiling to 2700 F.