Specifications include, but are not limited to: 1. Aluminum Boat 1.1. Hull Specifications 1.1.1. Length: 20’ LOA (motor guard not included) 1.1.2. Bottom: 72” (3/16”) 1.1.3. Sides: 23” (3/16”) 1.1.4. Beam: 7’8” 1.2. Hull Construction 1.2.1. Bottom, Sides and Transom: 3/16” 5086 marine grade aluminum 1.2.2. Sealed and Pressure tested double bottom 1.2.3. Floors and Decks: 1/8” tread plate 1.2.4. Transom designed for 20” shaft outboard engine 1.2.5. Four (4) combo lifting eyes and cleats port and starboard (bow and stern) 1.3. Rib Structure 1.3.1. Longitudinal: 1.3.1.1. Four (4) – 3” x 1-1/8” x 3/16” corrugated bottom runners pressed into hull plating 1.3.1.2. Two (2) – 3” x 1-1/8” x 3/16” corrugated side runners pressed into side plating 1.3.2. Transverse: 1.3.2.1. 1/8” bow bulkhead – sealed welded and pressure tested 1.3.2.2. 3” x 2” x 1/8” square tubing floor supports on 16” centers 1.3.2.3. 1” x 1” x 1/8” angle tacked underneath flooring between each rib section