Specifications include, but are not limited to: The bid shall include labor, materials, and services to perform the requirements below (Note – all productapplications must following manufacturers recommendations and all safety precautions):1. Preparation and painting of the existing metal roof.a. Please provide information about accessing the roof for cleaning and priming, and paintingwithout denting, damaging the roof.2. Clean the metal roof and front fascia. Remove all loose and peeling paint Brushing may be sufficientto ensure dirt-free surface, however, follow primer and paint manufacturers recommendations forcleaning the roof prior to priming. Allow surface to dry thoroughly before applying primer.3. Prime the metal roof and front fascia. The roof must be clean but dry and at the correct temperaturefor priming (50 to 90 degrees and preferably not in direct sunlight or over frosted or wet surfaces).Primer must be brushed on seams and pushed up into the folds of the seams to ensure coverage.The flats can be rolled or sprayed. In preparation for the paint apply one coat of Sherwin WilliamsPro-Cryl Universal Acrylic Metal Primer or equivalent - color gray. Per manufacturers’ instructions
