Specifications include, but are not limited to: Basin Avenue Phase 2, located in Pahrump, Nye County, Nevada. The project consists of: • A tack coat shall be applied to all vertical seams. • Residential and commercial driveways must be maintained and may need some adjustment by contractor before paving. • Contractor will be responsible to remove ramps into project and preparing area for tack and paving. • Paving 3” (PG 76-22NV) new asphalt surface on county prepared base per attached Exhibit A and Exhibit B. • Contractor shall maintain a cross slope of 2% minimum to 4% maximum unless otherwise approved by the Director of Public Works. • Contractor will be responsible to maintain low water crossings. • Diesel fuel shall not be used as an asphalt release agent on the project. • Material Transfer Vehicle is mandatory.