Specifications include, but are not limited to: SPECIFICATION – FUEL PRODUCT REQUIREMENTS:- All #2 fuel furnished shall conform to ASTM standards (#2 FUEL - D-396-08B and referenced documents) or mostrecent revision. The maximum sulfur content shall not exceed 0.4% or as indicated by the most recent ASTMstandard.- All K-1 kerosene fuel furnished shall conform to ASTM standards (K-1 kerosene - D-3699-02 and referenceddocuments) or most recent revision. The maximum sulfur content shall not exceed 0.04% or as indicated by themost recent ASTM standard.In the event of a change in the federal standard, the sulfur content will not exceed that which is mandated bythe Federal Government.SPECIFICATION - PRODUCT COMPLIANCE:It is mutually agreed that if the #2 heating oil, and K-1 kerosene furnished and delivered by the successfulvendor to the State of New Hampshire, does not conform to the standard specifications included in this bid,the State reserves the right to purchase said fuel elsewhere charging any additional cost to the Vendor. TheVendor will be responsible for removing the non-conforming fuel. The State may request an analysis, from anapproved laboratory, of the fuel delivered at no cost to the State. Vendor's offer must meet or exceed therequired specifications as written. The State of New Hampshire shall be the sole determining factor of whatmeets or exceeds the required specifications.
