Specifications include, but are not limited to: 1. 60’ Bucket Truck with Articulating Telescopic Aerial Device with a fiberglass upper boom and fiberglass insulator in the articulating arm and a proportional joystick upper control and toggle switches. Built-in accordance with standard specifications and to include the following minimum features: A. Ground to Bottom of Platform Height: 59.8 ft at 14.3 ft from centerline of rotation (18.2 m at 4.4 m) B. Working Height: 64.8 ft (19.8 m) C. Maximum reach to the edge of the platform: 40.1 ft at 26.6 ft platform height (12.2 m at 8.1 m) D. Continuous Rotation E. Articulating Arm Articulation: O to 93 degrees. Insulator provides a minimum of 12 in (304.8 mm) of isolation. F. Articulating arm is a tubular steel structure. The articulating arm is designed so that the articulating arm and lower boom are compensating. By raising the articulating arm only, the lower and upper boom maintains the same relative angle with the ground. By raising the articulating arm in conjunction with the lower boom, the operator is able to position himself more quickly and easily in the work area. G. Upper Boom Articulation: -25 to 75 degrees. Insulator provides a minimum of 36.0 in (914.4 mm) of isolation. The telescopic upper boom is filament wound, square fiberglass that is extended and retracted by a double-acting hydraulic cylinder installed within the booms. The boom extends and retracts over slide bearings located at the end of the lower boom.
