Specifications include, but are not limited to: 1. Structural/General Work: Existing Kensico Laboratory building will be renovated, and the space converted for use by DEP EOH BWS Operations. Scope of work includes hazardous material abatement/removal, demolition of all interior non-load bearing walls (down to studs), demolition and replacement of the existing staircase, relocation and maintenance of operation of the existing UPS and server equipment throughout construction, and installation of new UPS and server equipment at end of construction (see Other Work). 2. Civil Work: Sedimentation and erosion control, disposal of spoils, water supply piping, sanitary piping, foundation drain, roof drain connection to storm water system, natural gas piping, electrical ductbanks, lighting poles, HVAC equipment pads, site grading, landscaping, and driveway work including removal and replacement of asphalt pavement, new curbs, new bike rack, parking and cross walk striping (35 parking spaces), and new concrete sidewalk. 3. Architectural Work: Demo and remove existing flooring, acoustical ceiling tiles, and interior walls/panels. Reconfigure existing interior rooms to provide office space for 22 employees, provide 20-person conference room, kitchen with adjacent break area, bathrooms with locker room and showers, new server room, and reconfigure attic for installation of mechanical equipment (see HVAC). Replace interior and exterior doors, windows, lintels, and overhead garage doors. Install new drop ceilings and flooring systems. Install new office furniture, computers, printers and office equipment. Clean and repair existing slate roof, repair roof membrane, install waterproofing, install flashing, repair chimney flashing, replace window trim, install insulation on interior of exterior walls, clean and repair (repoint) exterior walls.