Specifications include, but are not limited to: 3.1.1.1 Must be fully jacketed and stationary. 3.1.1.2 Must have a minimum 60-gallon capacity. 3.1.1.3 Must have a spring assisted hinge cover with heavy duty pivot assembly. 3.1.1.4 Must have a 2” plug draw-off valve with perforated strainer. 3.1.1.5 Must have a graduated measuring rod. 3.1.1.6 Must have a faucet bracket. 3.1.1.7 Must be stainless steel construction with 316 series stainless steel liner. 3.1.1.8 Must have flanged feet. 3.1.1.9 Must have an electric ignition, 135,000 BTU. 3.1.1.10 Must be natural gas. 3.1.1.11 Must be 120v/60/1-ph, 3.0 amps, 300w for controls. 3.1.1.12 Must have blue hose gas connector kit ¾” inside diameter, 48” long, covered with stainless steel braid, coated with blue antimicrobial PVC. 3.1.1.13 Must have (1) Snapfast Quick Disconnect (QD), full port valve, (2) 90-degree elbows, coiled restraining cable with hardware, 180,000 BTU/hr minimum flow capacity. 3.1.1.14 Vendor shall provide installation and review start-up of equipment.
