Specifications include, but are not limited to: DUMP BODY 10 FOOT 9.5 YARD SPREADER DUMP BODY COMBINATION. FRONT AND REAR DISCHARGE, FRONT SPREAD WITH ENCLOSED CHUTE ASSEMBLY, 24 INCH CAB SHIELD, 7 GUAGE CONSTRUCTION THROUGHOUT, DOUBLE BAR FLIGHT BELT OVER CHAIN CONVEYOR, ¼ INCH AR FLOOR 20 TON MAILHOT TELESCOPIC HOIST DA. SAFETY BRACE AND BACK-UP ALARM AIR TAILGATE, TAILGATE LOCKS INSTALLED ON GATE, ONE PIECE SCREEN ASSEMBLY, CONVEYOR COVER PLATE, COAL DOOR, SIDE MOUNTED FOLD UP LADDER. ELECTRIC COVER WITH ALUMINUM ARMS, LED STROBE PACKAGE 2 FRONT AND 2 REAR SEPARATELY SWITCHED, ¾ INCH PINTLE PLATE WITH CUT OUTS FOR OEM TAILLIGHTS 24 TON PINTLEHOOK & D-RINGS. AIR AND ELECTRIC OF CHASSIS EXTENDED THRU SAME ICC LIGHTS, REFLECTORS, FRONT AND REAR FLAPS. DUMP BODY TO BE PAINTED TO MATCH CAB COLOR SINGLE STAGE PAINT. PLOWS CUSTOM FRONT PLOW TILT HITCH WITH DA LIFT CYLINDER, PLOWLIGHTS AND 6 INCH BY 4 INCH BY 3/8 INCH TUBULAR WING SUPPORTS. PATROL WING PACKAGE TO INCLUDE FRONT WING POST (CABLE OVER CYLINDER TYPE) WITH SLIDE, TRIP HINGE AND REAR PATROL WELDMENT, FULL TRIP ARMS WITH CYLINDER AND MECHANICAL FLOAT SYSTEM 11 FOOT HEAVY-DUTY RIGHT-HAND WING WITH 7 GUAGE PANELED MOLDBOARD AND ¾ INCH BACKER ANGLE. CYLINDERS SHALL BE NITRIDED. 11 FOOT FRONT PLOW POLY MOLDBOARD TRIP EDGE DESIGN MINIMUM 39 INCH HEIGHT, PLOW AND WING SHALL HAVE KENNEMETAL CARBIDE EDGES WITH COVER EDGE AND MOLDBOARD SHOES AND 1 PARKING LEG COMPLETE UNITS TO BE INSTALLED AND FULLY OPERATIONAL.
