Specifications include, but are not limited to: Tank Surface shows signs of leakage Tanks are damaged, rusted or deteriorated Tank supports are deteriorated or buckled Tank foundations have eroded or settled Level gauges or alarms are working Vents are free from obstructions Pump valve seals or gaskets are leaking Pipeline supports are damaged or deteriorated Stains or leaks are evident around piping Unloading areas show evidence of spills Fill pipe connections are damaged or not capped Secondary containment is damaged or stained Dike drainage valves are closed Overfill protection is working Emergency generator is working Emergency generator can accept an electrical load Emergency generator will operate fuel system Dispensers are damaged or deteriorated Dispenser hanging hardware (hose, swivel, nozzle and breakaway) is damaged or deteriorated Dispenser belts are cracked or worn Dispenser sump contains fluid Dispenser piping shows signs of leakage Dispenser screen is obstructed Dispenser lighting is working Dispenser display is readable Dispenser(s) are operable in “manual mode” Current Totalizer reading – Diesel Current Totalizer reading – Unleaded Tank Monitor console is damaged or is not secure Tank Monitor battery is working Tank Monitor printer is working Tank Monitor status report indicates water in tank(s) Tank Monitor probe(s) are working Tank Monitor product floats are working Tank Monitor water floats are working Tank Monitor overfill alarm is working Tank Monitor volume programming is correct for tank size and dimensions Card reader/pedestal is damaged or is not secure Card reader interior shows signs of leakage Card reader display is difficult to read Card reader network connection is secure Card reader boards are damaged Card reader wiring connections are secure Emergency stop switch is working Emergency stop switch is legible from island Absorbent material is available and sufficient Fire Extinguisher is sufficient and available Electrical panel surge protector is working Disconnect the phone line at the FMU Change the TMU back-up battery (Odd Numbered Years Only) If the FMU display is hard to read please adjust the LCD contrast If the dispenser totalizer is hard to read please resolve Check for the correct overfill protection-Note lack of overfill protection or incorrect overfill valves in AST Check for and remove water if present in tank
