Specifications include, but are not limited to: 1. Touchless In-Bay Automatic Drive-Thru Type. System shall be totally automatic being actuated by a vehicle driving through the touchless automatic wash system that is mounted in wash bay ; A. This system shall be an industrial quality, drive-thru wash system being able to complete a vehicle wash in less than 3 minutes. The wash system shall be touchless, utilizing a 2-Step Detergent cleaning method to breakdown and remove soils without the use of any brushes or friction devices touching the vehicle. 1. Vehicle wash system shall be of commercial-duty, and satisfactorily clean the owner’s fleet including all styles of vehicles up to 13’6” high and 40’ long for front, roof, both sides and rear. 2. The wash system shall have an undercarriage wash that will utilize a high-pressure pump system to provide a high-volume rinse to thoroughly remove soils off the underside of the vehicle. Special emphasis shall also be given to the wheel and wheel well area to remove heavy soils present there as well. A. The general contractor or end user and the manufacturer of the wash system are responsible for the supply of necessary equipment, materials and service for the complete assembly and erection of the equipment so that it is ready for operation as per all applicable specifications. B. The vehicle wash system shall be installed by the manufacturer and interconnected and connected to the building services by the contractor's or end user’s plumbing and electrical contractor. C. Start-up and commissioning of the wash system shall be performed by the wash system manufacturer. D. Training of the Berkley County employees shall be performed by the wash system manufacturer.
