Specifications include, but are not limited to: Furnish all labor, material and equipment to seal random cracks and apply pavement sealer to bituminous concrete pavement as outlined below: • Blow out cracks using a hot air lance with minimum 125 CFM 90 PSI air pressure, fill and seal all random cracks with a Type II hot applied rubberized crack sealant heated in a double jacketed melter to a minimum 325 degrees F. apply proper detack agent as necessary to allow vehicular traffic prior to cure. • Clean pavement to be sealed using brooms and air blowers, prime oil spots with a latex primer, apply (2) two coats of NEYRA FORCE environmentally sound, water-based, emulsified petroleum resin pavement sealer meeting ASTM D-2939 with #60 silica sand mixed with each gallon of raw sealer. The sealer shall be applied at a rate of a minimum of .023 gallons per square foot per (2) coats. • Line stripe to existing visible format.