Specifications include, but are not limited to: The project will include a modular tangential flow filtration system mounted on a portable skid. This document defines the requirements and deliverables for this system. It describes overall requirements that must be met to produce the specific equipment requested. This document covers the procurement and delivery of the systems, with no required installation. This URS is the input document for the: • Equipment procurement purposes. • Equipment sizing • Functional and technical specifications. The modular filtration system will provide a membrane filtration process that can support a wide range of volumes and applications. The system is designed to enable a client to rearrange the hardware to run varying batch sizes and membranes. It will support the use of several membrane sizes and types. Membrane types will include polymeric, tubular, hollow fiber, and ceramic. The system may or may not include recipe-based, fully automated control. 5.1 Capacities The filtration system should be capable of handling batch volumes up to 2400 L. The membrane feed pump shall be capable of, but not limited to, supplying 30-100 GPM at 25-100 psig. 5.2 Skidded Construction The filtration system shall be mounted on a portable, steel frame skid. Any control system, electrical panel, and all associated wiring shall be included. 5.3 Health, Safety and Environment (HSE) The filtration system will satisfy appropriate conformity assessment procedures and the controls shall carry the UL marking. The selected unit shall be constructed per the current ASME BPE standard. It will be designed to protect users from hot surfaces. Pressure relief safety valves or rupture disks shall be vented to a safe location.
