Specifications include, but are not limited to: The following project is to make improvements to the 2051 Airport Road property. The 2051 Airport Road building is approximately 37,350 square feet. All bidding contractors are solely responsible to field measure and verify exact building dimensions and material quantities required prior to bid. • Replace package roof top and split system condenser units. o Provide all labor, equipment, materials, permits and inspections to replace condensing units: Units to be Lennox 13ACXN or approved equal. CU01 – 5-ton, single stage, 13 SEER, 410A with hail guards. Reroute refrigerant lines from condensing unit above ground to existing coil. CU02 – 4-ton, single stage, 13 SEER, 410A with matching coil and hail guards. Reroute refrigerant lines from condensing unit above ground to new coil. CU06 - 5-ton, single stage, 13 SEER, 410A, with hail guards. Reroute refrigerant lines from condensing unit above ground to existing coil. Install new low voltage wire to condensing unit. o Provide all labor, equipment, materials, permits and inspections to replace package roof top heating and cooling unit. RTU07 – 15-ton 13 SEER, 410A, fresh air hood, hail guards and new curb adaptor if needed. Current unit is Trane model YCD180B3LBEA. Operation of the RTU will be by thermostat. • Replace doors and frames that have rust and corrosion. o Provide all labor, equipment, and materials to replace door frame at door “12” - 3’0” x 8”0” 16-gauge frame, galvanized, paint to match existing. Install new threshold and weather strip. Remove and reinstall all existing hardware and security contacts. o Provide all labor, equipment, and materials to replace door frame at door “15” - 3’0” x 8”0” 16-gauge frame, galvanized, paint to match existing. Install new threshold and weather strip. Remove and reinstall all existing hardware and security contacts.
